[EnergyPlus_Support] CoolingCoil:Water Nominal Capacity help

["adam.barker67" <abarker@xxxxxxxx>]

I've had a LEED reviewer comment that the capacity of the cooling coils in my AHUs do not match the mechanical schedule they have been provided.  They have taken these values from the Equipment summary report, and indeed they do not match as my coils were left to autosize design air and water flows (as I did not have enough info to fill this in at the time, and still don't).  

As there is no way to input a simple rated capacity of water cooling coils, can anyone shed light on the equation Energy Plus uses to come up with this rated capacity, and how I might adjust my inputs to show a capacity which match the equipment?

Many thanks,

Adam



------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/