[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] HVAC nodes and connections





Using the HVACTemplates are helpful to set up a basic outline of the system. From there you can open the expanded idf and modify that for a more complex design.


From: "energyplus_mimis" <welma.pereira@xxxxxxxxx>
To: "EnergyPlus Support" <EnergyPlus_Support@xxxxxxxxxxxxxxx>
Sent: Friday, July 12, 2013 4:04:14 AM
Subject: [EnergyPlus_Support] HVAC nodes and connections

 

Hi All,

I was wondering if somebody knows if there is some easier way to generate connections for HVAC systems. I know there is openstudio, but openstudio does not support all components, suppose I want to define an air loop with heat recovery system for example, is there a way to automatically generate the nodes using scripts or something like that?




__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___