Thanks for the prompt response. The other question is that the DOAS’s cooling coil is VRF type, is it possible to set this coil in EnergyPlus? Thanks. Stan Ho From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of Bereket Nigusse Stan, You can model the VRF and the DOAS as a separate systems serving each zone. To do this: (1) set the outdoor air flow rates in " ZoneHVAC:TerminalUnit:VariableRefrigerantFlow" objects to zero. (2) set up a central DOAS system that supplies the required amount of outdoor air to each zone. (3) connect the terminal air distribution units of the DOAS system to each zone (4) Make the DOAS terminal unit first priority and the VRF Zone Object the second priority in "ZoneHVAC:EquipmentList". The equipment set up in example file "ZoneWSHP_wDOAS" is a good starting point to understand the connection though this example is a single zone. Hope this helps. Bereket Nigusse Florida Solar Energy Center From: kkkimostan <tzunghan.ho@xxxxxxxxx> Hello, __._,_.___ Primary EnergyPlus support is found at: http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx The primary EnergyPlus web site is found at: http://www.energyplus.gov The group web site is: http://groups.yahoo.com/group/EnergyPlus_Support/ Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files. EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required) Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe __,_._,___ |
Attachment not found: C:\Users\lklawrie\Downloads\Embedded\image00194.jpg
Attachment not found: C:\Users\lklawrie\Downloads\Embedded\image00243.jpg