[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Re: External Interface

I have found my Problem. I was looking at warm up results in eso Viewer instead of the actual simulation result. It seems working. But there is one thing puzzling me. my result shows some ups and downs even if I send constant values for a checkup. Any idea why?


--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "korbaga" <korbaga1@...> wrote:
> Dear Group,
> I got the following problems in my co-simulation between energy plus and MLE+.
> The simulation completed successfully but E+ is not using the values I send from MLE+ and rather it is using its own internal logic to get values for those variables.
> Here are sample of the actuators I defined in my external interface:
>   EMS_RP5,                 !- Name
>      FifthFloor:Fifth%floor Radiant Panel,  !- Actuated Component Unique Name
>      Hydronic Low Temp Radiant,  !- Actuated Component Type
>      Water Mass Flow Rate,    !- Actuated Component Control Type
>      0.3;                     !- Optional Initial Value
> Tcoolingset,             !- Name
>      MAIN_AIR COOLING COIL OUTLET,  !- Actuated Component Unique Name
>      System Node Setpoint,    !- Actuated Component Type
>      Temperature Setpoint,    !- Actuated Component Control Type
>      16;                      !- Optional Initial Value
> I have checked from EMS-Application guide that those actuators are available and also checked edd file for their naming and seems every thing  is ok and I don't know why E+ don't use the values I send from MLE+.
> Regards
> korbaga


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:

The group web site is:

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to: