[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] Re: how to model thermal zone in concave shape





You can stick a "perfectly clear" window on the interzone partition and assign a zonemixing object to make sure the air between the zones remain "well mixed".

Sent from my iPhone (excuse the brevity)
Mit freundlichen Grü�en

i. A.
Jean Marais
B.Eng (Mech)
LEED Accredited Professional
Building Energy Modeling with DesignBuilder and EnergyPlus

b.i.g. bechtold
INGENIEURGESELLSCHAFT MBH
KeithstraÃ?e 6
10787 Berlin
Tel.   +49 30 6706662-23
Fax  +49 30 6706662-18

Official Reseller for DesignBuilder in Germany and Austria

Firmensitz: Berlin, Registergericht: Amtsgericht Charlottenburg, HRB 112242 B
Geschäftsführer: Bernd Bechtold, Tino Laupitz, Carsten Teichmann

"The LEED® (Leadership in Energy and Environmental Design) Green Building
Rating System is the nationally accepted benchmark for the design, construction,
and operation of high performance green buildings."
Other LEED descriptive copy may be found on the USGBC Web site: http://www.usgbc.org/

On 12.08.2013, at 18:43, Aymeric Novel <nanabush@xxxxxxxxxx> wrote:

 

Are you talking about surfaces defined only by a very small thermal resistance? If yes, I believe these do not let sun cross it, they are considered opaque, and would not then treat properly solar distribution. Or are you talking about a new object?

Aymeric



__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___