Huh?
ZoneInfiltration:DesignFlowRate,
... snip...
A4 , \field Design Flow Rate Calculation Method
\note The entered calculation method is used to create the maximum amount of infiltration
\note for this set of attributes
\note Choices: Flow/Zone => Design Flow Rate -- simply enter Design Flow Rate
\note Flow/Area => Flow per Zone Floor Area - Value * Floor Area (zone) = Design Flow Rate
\note Flow/ExteriorArea => Flow per Exterior Surface Area - Value * Exterior Surface Area (zone) = Design Flow Rate
\note Flow/ExteriorWallArea => Flow per Exterior Surface Area - Value * Exterior Wall Surface Area (zone) = Design Flow Rate
\note AirChanges/Hour => Air Changes per Hour - Value * Floor Volume (zone) adjusted for m3/s = Design Volume Flow Rate
Flow/ExteriorWallArea?????
At 02:02 PM 8/30/2013, Karen Walkerman wrote:
You can also use the ZoneInfiltration:DesignFlowRate object to model infiltration. Unfortunately, there is no way to enter a cfm/sf of exterior wall area into that object (Linda - request for next release??), but this will respond to temperatures and wind speed. It is not actually sensitive to the zone orientation, but is much easier to set up than an airflow network.
--
Karen
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
![]()
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___