If you use Refrigeration:System approach, there is the Refrigeration:Condenser:EvaporativeCooled object.
From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of Jim Dirkes
Sent: Tuesday, September 03, 2013 9:01 AM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Cc: Mitchell Gleason
Subject: [EnergyPlus_Support] Evaporative Condenser
Dear Forum,
We’re talking with a company about modeling a refrigerated warehouse which will use an evaporative condenser for their ammonia (R717) refrigeration system. E+ does not have an object for one of these and I’m thinking that we could use one of the fluid cooler objects as an acceptable substitute.
We’d love suggestions from those among you who have already modeled this situation. Thanks in advance!
James V Dirkes II, PE, BEMP, LEED AP
www.buildingperformanceteam.com
Energy Analysis, Commissioning & Training Services
1631 Acacia Drive, Grand Rapids, MI 49504 USA
616 450 8653
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___