[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Bldg-sim] Ammonia refrigeration compressor curves

To: "EnergyPlus_Support@xxxxxxxxxxxxxxx" <EnergyPlus_Support@xxxxxxxxxxxxxxx>, "bldg-sim@xxxxxxxxxxxxxxxxxxxxx" <Bldg-sim@xxxxxxxxxxxxxxxxxxxxx>
Subject: [Bldg-sim] Ammonia refrigeration compressor curves
From: Jim Dirkes <jim@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
Date: Thu, 5 Sep 2013 06:27:25 -0500
Accept-language: en-US
Acceptlanguage: en-US
Delivery-date: Thu, 05 Sep 2013 05:27:35 -0600
Envelope-to: linda@xxxxxxxxxxxxxx
List-archive: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org>
List-help: <mailto:bldg-sim-request@lists.onebuilding.org?subject=help>
List-id: Users of building energy simulation tools <bldg-sim-onebuilding.org>
List-post: <mailto:bldg-sim@lists.onebuilding.org>
List-subscribe: <http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org>, <mailto:bldg-sim-request@lists.onebuilding.org?subject=subscribe>
List-unsubscribe: <http://lists.onebuilding.org/options.cgi/bldg-sim-onebuilding.org>, <mailto:bldg-sim-request@lists.onebuilding.org?subject=unsubscribe>
Sender: bldg-sim-bounces@xxxxxxxxxxxxxxxxxxxxx
Thread-index: Ac6qKuWNwjP76PbbTqyI+HfIBiTDsA==
Thread-topic: Ammonia refrigeration compressor curves

Dear Forums,

I am looking for a source of part load performance for R717 (ammonia) compressors � about 200TR capacity. Will someone please point mee in the right direction?

Thank you!

James V Dirkes II, PE, BEMP, LEED AP
www.buildingperformanceteam.com
Energy Analysis, Commissioning & Training Services
1631 Acacia Drive, Grand Rapids, MI 49504 USA
616 450 8653

Prev by Date: Re: [EnergyPlus_Support] RE: RE: Calculated design heating load difference
Next by Date: RE: Re: [EnergyPlus_Support] RE: RE: Calculated design heating load difference
Previous by thread: RE: RE: [EnergyPlus_Support] Calculated design heating load difference
Next by thread: [EnergyPlus_Support] Water loops, hydraulic separator, pumps
Index(es):
- Date
- Thread