My suggestion is to introduce a subsurface type door with “small” surface the construction must have a thermal resistance according to surface an linear thermal transmittance calculated in THERM
Josep Solé
URSA Insulation S.A-
Sustainibility & Technical Manager
Móvil +34 606 42 32 14
P URALITA / URSA se compromete con el ahorro de energía. Antes de imprimir este mensaje asegúrese de que es necesario.
De: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] En nombre de Andres Zupfer
Enviado el: lunes, 14 de octubre de 2013 14:11
Para: EnergyPlus_Support@xxxxxxxxxxxxxxx
Asunto: [EnergyPlus_Support] Modeling of Thermal Bridges ?
Hi all,
when entering the construction of the external walls the thermal bridges are neglected.
However for some buildings this can be a significant error. Therefore I am looking for the best way to include the psi-value (calculated with external program like THERM or HEAT) into the construction.
A quick and dirty solution would be to change the thermal insulation of the wall accordingly (i.e. change the thermal conductivity of one or some materials). However this could be tedious because it might be different for each room, so I get a lot of new pseudo-constructions in to my idf file.
Does anyone have a good solution for this?
Thanks,
Andres
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___