[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Tables 6.8.1 - ASHRAE 90.1-2007 [1 Attachment]





Hello dear forum, 
I have two specific questions about mechanical equipment performance requirements (addressed in the tables 6.8.1 of ASHRAE 90.1-2007). 

1. From 6.8.1G: For axial fan cooling towers, the performance required is >= 3.23 L/s.kW. Below this table, it says this: ''Cooling tower performance is defined as the maximum flow rating of the tower divided by the fan nameplate rated motor power''. Just to confirm, the maximum flow rating refers to the water flow rate or to the air flow rate of the fan? 
Where can I see this value in the EnergyPlus report so that LEED reviewers can verify my information is OK?

2. I've often worked with central systems that use chillers. But for some project I see, there are condensing units and evaporative units. My question is what table do these equipment fit better: 6.8.1A, 6.8.1B or 6.8.1D? Please see attached to look at the diagrams.

Please advice,
Regards,

Billy Condor
LEED Green Associate



__._,_.___
View attachments on the web

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___
Attachment not found:
d:\eudora\attach\CONNECTION DIAGRAM.pdf