[EnergyPlus_Support] Ground source heat exchanger_ G-function [3 Attachments]

[<silvia1-@xxxxxxxxxx>]

Hi everybody.

I'm doing a simulation of an office building (5 storey, 4200 m2) combining an heat pump water-to-water system + vertical ground source heat exchanger with a four pipe fan coil system (in a second moment I will replace it with a radiant floor system) for heating and cooling.

I took the plant configuration from the GSHP-GLHE example file, but I'm not able to get the desidered temperature in my thermal zones and I guess is due to the configuration of the GHE. I understood that there is a software (GLHEPro) to calculate the g-function according to the building requirements, but I'm just a student who is doing this research for her final thesis and I cannot afford the purchased of a software.

Can someone give me some advice about my problem or send me some GHE configuration which could be fitted on a similar building?

Thank you everybody

__._,_.___

  	View attachments on the web
  







Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___

Attachment not found:
d:\eudora\attach\TORB+GHE.idf

Attachment not found:
d:\eudora\attach\ITA_Torino.160590_IWEC.epw

Attachment not found:
d:\eudora\attach\TORB+GHE.svg