[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [EnergyPlus_Support] Re: Controller function error





Occasionally the "Controller function is inconsistent�” error is due to setpoints that are inappropriate � e.g., heating setpoint higher than cooling setppoint.  E+ doesn’t handle that very well.  (Neither does a real control system!)

 

James V Dirkes II, PE, BEMP, LEED AP
www.buildingperformanceteam.com
Energy Analysis, Commissioning & Training Services
1631 Acacia Drive, Grand Rapids, MI 49504 USA
616 450 8653

 

From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of jeannieboef@xxxxxxxxx
Sent: Tuesday, October 29, 2013 3:10 PM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Cc: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: Re: [EnergyPlus_Support] Re: Controller function error

 

 

Could you post the exact error copy paste?

Mit freundlichen Grüßen- Sent from my iPhone (excuse the brevity)

 

i. A.

Jean Marais

b.i.g. bechtold

Tel.   +49 30 6706662-23


On 29.10.2013, at 15:40, "Yan, Ying" <yiy11005@xxxxxxxxxxxxxx> wrote:

 

Hello Jill,

 

Thank you so much for your answer.  Actually I used the IDFVersionUpdater.exe to update the IDF file obtained from DesignBuilder to 8.0.0.  There is no warning message.  I do not know whether the error that the "Controller function is inconsistent with user specified control action = "" action" is caused by any other reasons or not. Can you give me some suggestions?

 

----------------------------------------

Best Regards

 

Ying Yan

 

Graduate Student

Electrical & Computer Engineering

School of Engineering

University of Connecticut


From: EnergyPlus_Support@xxxxxxxxxxxxxxx [EnergyPlus_Support@xxxxxxxxxxxxxxx] on behalf of Jill Dalglish [jill.dalglish@xxxxxxxxxxxxxxxxxxxxx]
Sent: Tuesday, October 29, 2013 9:51 AM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: [EnergyPlus_Support] Re: Controller function error

 

Hello Ying Yan,

A few things that may help if you haven't figured this out already.

1. If the EPLaunch version doesn't match the IDF file version, there is usually a warning saying so.

2. There is a "Version" object in your IDF file. If that doesn't match, you will usually get this warning.

3. You can try to trick the program into getting rid of this warning by just changing the version in the IDF file in a text editor, but this is merely cosmetic.

4. If you know your IDF version is 8.0 or the latest version, I would just download and install the latest version of EnergyPlus, then they should match.

Good luck,

Jill



__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___