[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] RE: Sol-air Temperature in EnergyPlus

Heat exchange with a surface in e+ is broken down into radiation and convective exchange componants. You'll need to output both to see the split, however, I think the sensible heat gain tables in the all summary report may also be helpful.

---In EnergyPlus_Support@xxxxxxxxxxxxxxx, <energyplus_support@xxxxxxxxxxxxxxx> wrote:

Hi, all

Does EnergyPlus can calculate and output Sol-air Temperature at each external envelop? It seems that EnergyPlus doesn't use Sol-air Temperature in its calculation.

Does anybody who knows how to output Sol-air Temperature in EnergyPlus?

Thanks very much.

Xiwang Li


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:

The group web site is:

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe