[
Date Prev
][
Date Next
][
Thread Prev
][
Thread Next
][
Date Index
][
Thread Index
]
[EnergyPlus_Support] External Roller Shade at 1.6 m from window
To
: <
EnergyPlus_Support@xxxxxxxxxxxxxxx
>
Subject
: [EnergyPlus_Support] External Roller Shade at 1.6 m from window
From
: <
jeannieboef@xxxxxxxxx
>
Date
: 08 Nov 2013 02:05:09 -0800
Delivered-to
: mailing list
EnergyPlus_Support@xxxxxxxxxxxxxxx
Delivery-date
: Fri, 08 Nov 2013 03:05:11 -0700
Dkim-signature
: v=1; a=rsa-sha256; c=relaxed/relaxed; d=yahoogroups.com; s=echoe; t=1383905110; bh=lT1xhYhuqw5IBJjObhskN3/ucqpQ3XbwelWaEJ18WGA=; h=Received:Received:X-Yahoo-Newman-Id:X-Sender:X-Apparently-To:X-Received:X-Received:X-Received:X-Received:X-Received:X-Received:X-Received:To:Message-ID:X-Mailer:X-Originating-IP:X-eGroups-Msg-Info:X-Yahoo-Post-IP:From:X-Yahoo-Profile:Sender:MIME-Version:Mailing-List:Delivered-To:List-Id:Precedence:List-Unsubscribe:Date:Subject:Reply-To:X-Yahoo-Newman-Property:Content-Type; b=NTPjQscXa9e9ouWT9HHRsO437yYuWzJhR8J+5s7Ucek3XalOTXnmyV3EDM4kLecgO95P389mSkdcooVU6MmPDjqXjZKABUyIzBlggFpVlKSSg8/WA13et4TJ+ghzCCRpAhwpOzmqjSCJhSOqfyPtWxs5h+CRk77+YWRenxLEnh0=
Domainkey-signature
: a=rsa-sha1; q=dns; c=nofws; s=echoe; d=yahoogroups.com; b=QK73aG5OwGt9dH1Qy+xAA5H3bW9aTC9MGJCQ3Uh2os4aavNjBh+e2zVbpUNdxEHsGpHRVYEoy0w8qD1zIZ4t0tQ4nOHqu3KfnZ0wJkVTMteMzwE5zKCk8RnZzQCfeS4JlVTQzQ9zmqiSQyInmc0YDsTprox+Dj9gSe73+TcAHgo=;
Envelope-to
:
linda@xxxxxxxxxxxxxx
List-id
: <EnergyPlus_Support.yahoogroups.com>
List-unsubscribe
: <
mailto:EnergyPlus_Support-unsubscribe@yahoogroups.com
>
Mailing-list
: list
EnergyPlus_Support@xxxxxxxxxxxxxxx
; contact
EnergyPlus_Support-owner@xxxxxxxxxxxxxxx
Reply-to
:
EnergyPlus_Support@xxxxxxxxxxxxxxx
Sender
:
EnergyPlus_Support@xxxxxxxxxxxxxxx
I have a roller blind...not against the window, but from the edge of an overhanging canopy about 1.6 meters away from the window.
Using an external shading surface will only reduce the direct radiation...will it reduce the diffuse radiation? (I think not)
Should it reduce the diffuse radiation? (I think somewhat)
Which options are the best to simulate this? (bearing in mind model applicability ranges...which I don't know)
Jean
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com
or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Your email settings: Individual Email|Traditional
Change settings via the Web
(Yahoo! ID required)
Change settings via email:
Switch delivery to Daily Digest
|
Switch to Fully Featured
Visit Your Group
|
Yahoo! Groups Terms of Use
|
Unsubscribe
__,_._,___
Prev by Date:
Re: [EnergyPlus_Support] How to change the solar radiation calculation model in Energyplus
Next by Date:
[EnergyPlus_Support] Chilled ceiling radiated and convective output
Previous by thread:
[EnergyPlus_Support] Re: How to model "Dry Cooler" and "Run-Around Heat Recovery" using HVAC Templates?
Next by thread:
[EnergyPlus_Support] Chilled ceiling radiated and convective output
Index(es):
Date
Thread