[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] Chilled ceiling radiated and convective output
- To: <EnergyPlus_Support@xxxxxxxxxxxxxxx>
- Subject: [EnergyPlus_Support] Chilled ceiling radiated and convective output
- From: <geert.bellens@xxxxxxxxxxxxxxxxxxxxxx>
- Date: 08 Nov 2013 03:30:13 -0800
- Delivered-to: mailing list EnergyPlus_Support@xxxxxxxxxxxxxxx
- Delivery-date: Fri, 08 Nov 2013 04:30:16 -0700
- Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=yahoogroups.com; s=echoe; t=1383910214; bh=hIfoULPUE7Cm+/bbjZH/7zPImXj/34bQ52pOSxiO4LM=; h=Received:Received:X-Yahoo-Newman-Id:X-Sender:X-Apparently-To:X-Received:X-Received:X-Received:X-Received:X-Received:X-Received:X-Received:To:Message-ID:X-Mailer:X-Originating-IP:X-eGroups-Msg-Info:X-Yahoo-Post-IP:From:X-Yahoo-Profile:Sender:MIME-Version:Mailing-List:Delivered-To:List-Id:Precedence:List-Unsubscribe:Date:Subject:Reply-To:X-Yahoo-Newman-Property:Content-Type; b=b1W+8XTkKN9YpSHWbkCSMwsht2EvGZ4pZas+EuDz73M6Vma9pM73kgsQSbo1ExavRjdYzEl/FcZI3CdW1rzlRqxVJlRTA35iUTB3JqGCLiW/M1Bdnd9Kc8EAp0sUEDiocR9S45dSpMyeMq5CqfoRAcVkeBGJP5KtpGbmBBI95w4=
- Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=echoe; d=yahoogroups.com; b=1mFMnti9Cqa6ka0wefXlUo+9n/L/XvT94SnjgaNua90hwKXCGCi4+uahq3GCfvh8q+h7iXwb/UFnpioP8DYDvoPqemTfHF5R3PtGkBKkWTLrAiVjSoZJZnJJ7/dHUmyTgTTtB+gi4kVJzmSXQEuVdUPjuoohlOUHV514cBNZ40c=;
- Envelope-to: linda@xxxxxxxxxxxxxx
- List-id: <EnergyPlus_Support.yahoogroups.com>
- List-unsubscribe: <mailto:EnergyPlus_Support-unsubscribe@yahoogroups.com>
- Mailing-list: list EnergyPlus_Support@xxxxxxxxxxxxxxx; contact EnergyPlus_Support-owner@xxxxxxxxxxxxxxx
- Reply-to: EnergyPlus_Support@xxxxxxxxxxxxxxx
- Sender: EnergyPlus_Support@xxxxxxxxxxxxxxx
I'm modelling a chilled ceiling.
I have the "Surface Inside Face Conduction Heat transfer Rate " Which gives me an idea of the heat transfer between the zone and the ceiling.
If I want to look to the radiant and the convective part, I'm a bit confused about which output to look at.
"Surface Inside Face Convection Heat Gain Rate" gives me the convective part, which is about 40 % of the total Heat Transfer Rate.
"Surface Inside Face Conduction Heat Gain Rate" is however zero.... which cannot be the case.
Am I looking at the wrong output ?
Geert
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
![]()
__,_._,___