[EnergyPlus_Support] Loads not met when using HVACTemplate Objects

[<sbucking@xxxxxxxxx>]

Hi Everyone,

I am running some batch simulations which swap in/out HVACTemplate objects for various mechanical systems all being auto-sized.

I am noticing that HTMLs indicate that many systems have 100's of hours where heating/cooling loads are not met. I can make some headway by modifying each file directly but the process is very slow. Since I am comparing systems directly, I need to ensure that setpoints are equally for all options.

Does anyone have advice on how I should be approaching this? Can it be solved from the HVACTemplate level (ie without modifying expanded IDFs)?

Many Thanks,

Scott

__._,_.___

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___