[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] Loads not met when using HVACTemplate Objects

Try to modify the sizing factor. And look carefully the internal walls maybe the conctats are not ok.

Good luck.


On Nov 28, 2013 7:42 PM, <sbucking@xxxxxxxxx> wrote:

Hi Everyone,

I am running some batch simulations which swap in/out HVACTemplate objects for various mechanical systems all being auto-sized.

I am noticing that HTMLs indicate that many systems have 100's of hours where heating/cooling loads are not met. I can make some headway by modifying each file directly but the process is very slow. Since I am comparing systems directly, I need to ensure that setpoints are equally for all options.

Does anyone have advice on how I should be approaching this? Can it be solved from the HVACTemplate level (ie without modifying expanded IDFs)?

Many Thanks,



Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:

The group web site is:

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe