Re: [EnergyPlus_Support] Heat Exchanger outlet temperature

[Karen Walkerman <kwalkerman@xxxxxxxxx>]

What are you using to change the air temperature if the heat exchanger can't meet setpoint on its own? What is the setpoint temperature? In the winter an economizer would probably be all you need. However,  depending on what the setpoint is, in the summer,  a cooling coil might be needed to achieve setpoint.

--
Karen

On Dec 3, 2013 9:23 AM, <alexmac_00@xxxxxxxx> wrote:

 

Dear users,

I am modelling an Air Loop with an heat exchanger air to air sensible and latent.
It is controlled by a setpoint manager schedule at its outlet node (it represents the maximum temperature allowed at the outlet node). The control works perfectly fine during the winter, but I get very high temperature during the summer, above the setpoint temperature. Any clue?
Thanks,

Alessandro

__._,_.___

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___