[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] Re: Quick path to learn HVAC detailed modeling approach, is there an [1 Attachment]





I  couldn't resist not to write a few lines after reading Karen's email, especially the line where she says "... and Simergy and N+++ were whispered rumors".

N++ is official now and has many features that I would like to share with this group including some that were mentioned in the "light weight GUI for HVAC systems" part of discussion ...
A good opportunity to find out more about what is that you can do with N++ is to attend the on line demo next Thursday. If you would like to register, please go to
https://attendee.gotowebinar.com/register/8793112601078421762

In a mean while, I would like to share a 3D view snapshot from one of mine current projects that was done in N++.



Best,

Vladimir
ExpertApp


On Thursday, December 12, 2013 3:47 PM, Jeremiah Crossett <jcrossett@xxxxxxxxxxxxxxx> wrote:
 
Agreed. 



Jeremiah D. Crossett  | Senior Analyst  |  Phase Change Energy Solutions
120 E. Pritchard St.  | Asheboro, NC 27203 
 | Mobile 503-688-8951
  





On Thu, Dec 12, 2013 at 12:45 PM, Jim Dirkes <jim@xxxxxxxxxxxxxxxxxxxxxxxxxxx> wrote:
 
If she shares, you aren't allowed to ask for documentation, complain about any problems or ask many questions :)


James V Dirkes II, PE, BEMP, LEED AP
www.buildingperformanceteam.com
Energy Analysis, Commissioning & Training Services
1631 Acacia Drive, Grand Rapids, MI 49504 USA
616 450 8653

-----Original Message-----
From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of Ery Djunaedy
Sent: Thursday, December 12, 2013 3:43 PM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: Re: [EnergyPlus_Support] Re: Quick path to learn HVAC detailed modeling approach, is there an

Karen, I would like to give it a try if you are willing to share.

On 12/12/2013 12:25 PM, Karen Walkerman wrote:
>
> I started creating this when openstudio was still a buggy SketchUp
> geometry plug-in, DesignBuilder was expensive and clumsy and Simergy
> and N+++ were whispered rumors. I have thought at times of sharing
> the software, but I am not sure what that would look like. I have
> spent too much time and effort to give it away, but once this
> discussion started, I couldn't not share.
>

------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.

EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo Groups Links






__._,_.___
View attachments on the web

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___
Attachment not found:
d:\eudora\attach\WORK_IN_PROGRESS.jpg