[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [EnergyPlus_Support] curve viewer [1 Attachment]





Dear Geert,

Visualization was a primary purpose of that spreadsheet, so I expect that you can display any standard curve!

I’ve attached an updated version of the sheet which is a bit cleaner in its organization. Without going into too much detail:

·         Find the “DISPLAY …. Curve” section of the spreadsheet which is appropriate for the specific curve type

·         Enter your specific coefficients in the  “Values in use for the chart display” table

·         Visualize

 

Let me know if there is something still not clear.

 

James V Dirkes II, PE, BEMP, LEED AP
w

View attachments on the web

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___
Attachment not found:
d:\eudora\attach\BPT CurveFitTools 13-1205.xlsb