Mhh, I just downloaded EnergyPlusV7-2-0 and executed the simulate button. Same case... No sqlite file has been created.
This is my whole file... Can anybody help me?
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
!-Generator IDFEditor 1.43
!-Option SortedOrder
!-NOTE: All comments with '!-' are ignored by the IDFEditor and are generated automatically.
!- Use '!' comments if they need to be retained when using the IDFEditor.
!- =========== ALL OBJECTS IN CLASS: VERSION ===========
Version,
7.2; !- Version Identifier
!- =========== ALL OBJECTS IN CLASS: SIMULATIONCONTROL ===========
SimulationControl,
No, !- Do Zone Sizing
Calculation
No, !- Do System Sizing Calculation
No, !- Do Plant Sizing Calculation
No, !- Run Simulation for Sizing Periods
Yes; !- Run Simulation for Weather File Run Periods
!- =========== ALL OBJECTS IN CLASS: BUILDING ===========
Building,
RaumA, !- Name
-0, !- North Axis {deg}
City, !- Terrain
0.04, !- Loads Convergence Tolerance Value
0.4, !- Temperature Convergence Tolerance Value {deltaC}
FullExterior,
!- Solar Distribution
50, !- Maximum Number of Warmup Days
25; !- Minimum Number of Warmup Days
!- =========== ALL OBJECTS IN CLASS: TIMESTEP ===========
Timestep,
6; !- Number of Timesteps per Hour
!- =========== ALL OBJECTS IN CLASS: PROGRAMCONTROL ===========
ProgramControl,
1; !- Number of Threads Allowed
!- =========== ALL OBJECTS IN CLASS: SITE:LOCATION ===========
Site:Location,
Munich_Deu, !-
Name
48.13, !- Latitude {deg}
11.7, !- Longitude {deg}
1, !- Time Zone {hr}
529; !- Elevation {m}
!- =========== ALL OBJECTS IN CLASS: RUNPERIOD ===========
RunPeriod,
Run Period 1, !- Name
1, !- Begin Month
1, !- Begin Day of Month
12, !- End Month
31, !- End Day of Month
UseWeatherFile, !- Day of Week for Start Day
Yes, !- Use Weather File Holidays and Special Days
Yes, !- Use Weather File Daylight Saving Period
No, !- Apply Weekend Holiday Rule
Yes, !- Use Weather File Rain Indicators
Yes, !- Use Weather File Snow Indicators
1,
!- Number of Times Runperiod to be Repeated
Yes; !- Increment Day of Week on repeat
!- =========== ALL OBJECTS IN CLASS: RUNPERIODCONTROL:DAYLIGHTSAVINGTIME ===========
RunPeriodControl:DaylightSavingTime,
2nd Sunday in March, !- Start Date
1st Sunday in November; !- End Date
!- =========== ALL OBJECTS IN CLASS: SIZING:PARAMETERS ===========
Sizing:Parameters,
1, !- Heating Sizing Factor
1; !- Cooling Sizing Factor
!- =========== ALL OBJECTS IN CLASS: SCHEDULE:TYPELMITIS ===========
ScheduleTypeLimits,
Limit_Fraction, !- Name
0.0, !- Lower Limit Value
1.0, !- Upper Limit Value
Continuous; !- Numeric Type
ScheduleTypeLimits,
On/Off, !- Name
0.0, !- Lower Limit Value
1.0, !- Upper Limit Value
Continuous; !- Numeric Type
ScheduleTypeLimits,
Limit_Metabolic, !- Name
0, !- Lower Limit Value
200,
!- Upper Limit Value
Continuous; !- Numeric Type
ScheduleTypeLimits,
Limit_Clothing, !- Name
0, !- Lower Limit Value
5, !- Upper Limit Value
Continuous;
!- Numeric Type
ScheduleTypeLimits,
Limit_Air_Velo, !- Name
0, !- Lower Limit Value
2, !- Upper Limit Value
Continuous; !- Numeric Type
ScheduleTypeLimits,
Limit_Setpoints, !- Name
10, !- Lower Limit Value
45, !- Upper Limit Value
Continuous; !- Numeric Type
!- =========== ALL OBJECTS IN CLASS: GLOBALGEOMETRYRULES ===========
GlobalGeometryRules,
UpperLeftCorner, !- Starting Vertex Position
Counterclockwise, !- Vertex Entry Direction
Relative, !- Coordinate System
Relative, !- Daylighting Reference Point Coordinate System
Relative; !- Rectangular Surface Coordinate System
!-
=========== ALL OBJECTS IN CLASS: ZONE ===========
Zone,
Th_ZONE_east, !- Name
-90, !- Direction of Relative North {deg}
150, !- X Origin {m}
150, !- Y Origin {m}
0; !- Z Origin {m}
Zone,
Th_ZONE_west, !- Name
90, !- Direction of Relative North {deg}
-150, !- X Origin {m}
150, !- Y Origin {m}
0; !- Z Origin {m}
Zone,
Th_ZONE_north, !- Name
180, !- Direction of Relative North {deg}
0, !- X Origin {m}
300, !- Y Origin {m}
0; !- Z Origin {m}
Zone,
Th_ZONE_south, !- Name
-0, !- Direction of Relative North {deg}
0, !- X Origin {m}
0, !- Y Origin {m}
0; !- Z Origin {m}
!- =========== ALL OBJECTS IN CLASS: ZONELIST ===========
ZoneList,
Zone_List, !- Name
Th_ZONE_south, !- Zone 1 Name
Th_ZONE_west, !- Zone 2 Name
Th_ZONE_north, !- Zone 3 Name
Th_ZONE_east; !- Zone 4 Name
!- =========== ALL OBJECTS IN CLASS:
BUILDINGSURFACE:DETAILED ===========
BuildingSurface:Detailed,
east_ext_wall_01, !- Name
Wall, !- Surface Type
Ext_Wall, !- Construction Name
Th_ZONE_east, !- Zone Name
Outdoors, !- Outside Boundary Condition
,
!- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
, !- View Factor to Ground
4, !- Number of Vertices
0.000000000000, !- Vertex 1 X-coordinate {m}
0.000000000000, !-
Vertex 1 Y-coordinate {m}
3.0, !- Vertex 1 Z-coordinate {m}
0.000000000000, !- Vertex 2 X-coordinate {m}
0.000000000000, !- Vertex 2 Y-coordinate {m}
0.000000000000, !- Vertex 2 Z-coordinate {m}
5.0, !- Vertex 3 X-coordinate {m}
0.000000000000, !- Vertex 3 Y-coordinate {m}
0.000000000000,
!- Vertex 3 Z-coordinate {m}
5.0, !- Vertex 4 X-coordinate {m}
0.000000000000, !- Vertex 4 Y-coordinate {m}
3.0; !- Vertex 4 Z-coordinate {m}
BuildingSurface:Detailed,
east_int_wall_03, !- Name
Wall, !- Surface Type
Int_Wall,
!- Construction Name
Th_ZONE_east, !- Zone Name
Adiabatic, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
, !- View Factor to
Ground
4, !- Number of Vertices
0.000000000000, !- Vertex 1 X-coordinate {m}
5.0, !- Vertex 1 Y-coordinate {m}
3.0, !- Vertex 1 Z-coordinate {m}
0.000000000000, !- Vertex 2 X-coordinate {m}
5.0, !- Vertex 2 Y-coordinate {m}
0.000000000000, !-
Vertex 2 Z-coordinate {m}
0.000000000000, !- Vertex 3 X-coordinate {m}
0.000000000000, !- Vertex 3 Y-coordinate {m}
0.000000000000, !- Vertex 3 Z-coordinate {m}
0.000000000000, !- Vertex 4 X-coordinate {m}
0.000000000000, !- Vertex 4 Y-coordinate {m}
3.0; !- Vertex 4 Z-coordinate {m}
BuildingSurface:Detailed,
east_int_ceiling_01, !- Name
Ceiling, !- Surface Type
Int_Ceiling, !- Construction Name
Th_ZONE_east, !- Zone Name
Adiabatic, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
NoSun,
!- Sun Exposure
NoWind, !- Wind Exposure
, !- View Factor to Ground
4, !- Number of Vertices
5.0, !- Vertex 1 X-coordinate {m}
5.0, !- Vertex 1 Y-coordinate {m}
3.0, !- Vertex 1 Z-coordinate
{m}
0.000000000000, !- Vertex 2 X-coordinate {m}
5.0, !- Vertex 2 Y-coordinate {m}
3.0, !- Vertex 2 Z-coordinate {m}
0.000000000000, !- Vertex 3 X-coordinate {m}
0.000000000000, !- Vertex 3 Y-coordinate {m}
3.0, !- Vertex 3 Z-coordinate {m}
5.0, !- Vertex 4 X-coordinate {m}
0.000000000000, !- Vertex 4 Y-coordinate {m}
3.0; !- Vertex 4 Z-coordinate {m}
BuildingSurface:Detailed,
east_int_wall_02, !- Name
Wall, !- Surface Type
Int_Wall, !- Construction Name
Th_ZONE_east, !- Zone Name
Adiabatic, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
, !- View Factor to Ground
4, !- Number of
Vertices
5.0, !- Vertex 1 X-coordinate {m}
5.0, !- Vertex 1 Y-coordinate {m}
3.0, !- Vertex 1 Z-coordinate {m}
5.0, !- Vertex 2 X-coordinate {m}
5.0, !- Vertex 2 Y-coordinate {m}
0.000000000000, !- Vertex 2 Z-coordinate {m}
0.000000000000, !- Vertex 3 X-coordinate {m}
5.0, !- Vertex 3 Y-coordinate {m}
0.000000000000, !- Vertex 3 Z-coordinate {m}
0.000000000000, !- Vertex 4 X-coordinate {m}
5.0, !- Vertex 4 Y-coordinate {m}
3.0; !- Vertex 4 Z-coordinate {m}
BuildingSurface:Detailed,
east_int_wall_01, !- Name
Wall, !- Surface Type
Int_Wall, !- Construction Name
Th_ZONE_east, !- Zone Name
Adiabatic, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind,
!- Wind Exposure
, !- View Factor to Ground
4, !- Number of Vertices
5.0, !- Vertex 1 X-coordinate {m}
0.000000000000, !- Vertex 1 Y-coordinate {m}
3.0, !- Vertex 1 Z-coordinate {m}
5.0, !- Vertex 2 X-coordinate {m}
0.000000000000, !- Vertex 2 Y-coordinate {m}
0.000000000000, !- Vertex 2 Z-coordinate {m}
5.0, !- Vertex 3 X-coordinate {m}
5.0, !- Vertex 3 Y-coordinate {m}
0.000000000000, !- Vertex 3 Z-coordinate {m}
5.0, !- Vertex 4 X-coordinate {m}
5.0, !- Vertex 4 Y-coordinate {m}
3.0; !- Vertex 4 Z-coordinate {m}
BuildingSurface:Detailed,
east_int_floor_01, !- Name
Floor, !- Surface Type
Int_Floor, !- Construction Name
Th_ZONE_east, !- Zone Name
Adiabatic, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
, !- View Factor to Ground
4, !- Number of Vertices
5.0, !- Vertex 1 X-coordinate {m}
0.000000000000, !- Vertex 1 Y-coordinate {m}
0.000000000000, !- Vertex 1 Z-coordinate {m}
0.000000000000, !- Vertex 2 X-coordinate {m}
0.000000000000, !- Vertex 2 Y-coordinate {m}
0.000000000000, !- Vertex 2 Z-coordinate {m}
0.000000000000, !- Vertex 3 X-coordinate {m}
5.0, !- Vertex 3 Y-coordinate {m}
0.000000000000, !- Vertex 3 Z-coordinate {m}
5.0, !- Vertex 4 X-coordinate {m}
5.0, !- Vertex 4 Y-coordinate {m}
0.000000000000; !- Vertex 4 Z-coordinate {m}
BuildingSurface:Detailed,
west_ext_wall_01, !- Name
Wall, !- Surface Type
Ext_Wall, !- Construction Name
Th_ZONE_west, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
,
!- View Factor to Ground
4, !- Number of Vertices
0.000000000000, !- Vertex 1 X-coordinate {m}
0.000000000000, !- Vertex 1 Y-coordinate {m}
3.0, !- Vertex 1 Z-coordinate {m}
0.000000000000, !- Vertex 2 X-coordinate {m}
0.000000000000, !- Vertex 2 Y-coordinate {m}
0.000000000000, !- Vertex 2 Z-coordinate {m}
5.0, !- Vertex 3 X-coordinate {m}
0.000000000000, !- Vertex 3 Y-coordinate {m}
0.000000000000, !- Vertex 3 Z-coordinate {m}
5.0, !- Vertex 4 X-coordinate {m}
0.000000000000, !- Vertex 4 Y-coordinate {m}
3.0; !- Vertex 4 Z-coordinate {m}
BuildingSurface:Detailed,
west_int_wall_02, !- Name
Wall, !- Surface Type
Int_Wall, !- Construction Name
Th_ZONE_west, !- Zone Name
Adiabatic, !- Outside Boundary Condition
,
!- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
, !- View Factor to Ground
4, !- Number of Vertices
5.0, !- Vertex 1 X-coordinate {m}
5.0, !- Vertex 1 Y-coordinate {m}
3.0, !- Vertex 1 Z-coordinate {m}
5.0, !- Vertex 2 X-coordinate {m}
5.0, !- Vertex 2 Y-coordinate {m}
0.000000000000, !- Vertex 2 Z-coordinate {m}
0.000000000000, !- Vertex 3 X-coordinate {m}
5.0, !- Vertex 3 Y-coordinate {m}
0.000000000000, !- Vertex 3 Z-coordinate {m}
0.000000000000, !- Vertex 4 X-coordinate {m}
5.0, !- Vertex 4 Y-coordinate {m}
3.0; !- Vertex 4 Z-coordinate {m}
BuildingSurface:Detailed,
west_int_ceiling_01, !- Name
Ceiling, !- Surface Type
Int_Ceiling, !- Construction Name
Th_ZONE_west, !- Zone Name
Adiabatic, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
, !- View Factor to Ground
4,
!- Number of Vertices
0.000000000000, !- Vertex 1 X-coordinate {m}
0.000000000000, !- Vertex 1 Y-coordinate {m}
3.0, !- Vertex 1 Z-coordinate {m}
5.0, !- Vertex 2 X-coordinate {m}
0.000000000000, !- Vertex 2 Y-coordinate {m}
3.0, !- Vertex 2 Z-coordinate {m}
5.0, !- Vertex 3 X-coordinate {m}
5.0, !- Vertex 3 Y-coordinate {m}
3.0, !- Vertex 3 Z-coordinate {m}
0.000000000000, !- Vertex 4 X-coordinate {m}
5.0, !- Vertex 4 Y-coordinate {m}
3.0; !- Vertex 4 Z-coordinate {m}
BuildingSurface:Detailed,
west_int_floor_01,
!- Name
Floor, !- Surface Type
Int_Floor, !- Construction Name
Th_ZONE_west, !- Zone Name
Adiabatic, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
, !- View Factor to Ground
4, !- Number of Vertices
0.000000000000, !- Vertex 1 X-coordinate {m}
5.0, !- Vertex 1 Y-coordinate {m}
0.000000000000, !- Vertex 1 Z-coordinate {m}
5.0,
!- Vertex 2 X-coordinate {m}
5.0, !- Vertex 2 Y-coordinate {m}
0.000000000000, !- Vertex 2 Z-coordinate {m}
5.0, !- Vertex 3 X-coordinate {m}
0.000000000000, !- Vertex 3 Y-coordinate {m}
0.000000000000, !- Vertex 3 Z-coordinate {m}
0.000000000000, !- Vertex 4 X-coordinate {m}
0.000000000000,
!- Vertex 4 Y-coordinate {m}
0.000000000000; !- Vertex 4 Z-coordinate {m}
BuildingSurface:Detailed,
west_int_wall_01, !- Name
Wall, !- Surface Type
Int_Wall, !- Construction Name
Th_ZONE_west, !- Zone Name
Adiabatic,
!- Outside Boundary Condition
, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
, !- View Factor to Ground
4, !- Number of Vertices
5.0,
!- Vertex 1 X-coordinate {m}
0.000000000000, !- Vertex 1 Y-coordinate {m}
3.0, !- Vertex 1 Z-coordinate {m}
5.0, !- Vertex 2 X-coordinate {m}
0.000000000000, !- Vertex 2 Y-coordinate {m}
0.000000000000, !- Vertex 2 Z-coordinate {m}
5.0, !- Vertex 3 X-coordinate {m}
5.0, !-
Vertex 3 Y-coordinate {m}
0.000000000000, !- Vertex 3 Z-coordinate {m}
5.0, !- Vertex 4 X-coordinate {m}
5.0, !- Vertex 4 Y-coordinate {m}
3.0; !- Vertex 4 Z-coordinate {m}
BuildingSurface:Detailed,
west_int_wall_03, !- Name
Wall, !- Surface
Type
Int_Wall, !- Construction Name
Th_ZONE_west, !- Zone Name
Adiabatic, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
, !- View Factor to Ground
4, !- Number of Vertices
0.000000000000, !- Vertex 1 X-coordinate {m}
5.0, !- Vertex 1 Y-coordinate {m}
3.0, !- Vertex 1 Z-coordinate {m}
0.000000000000, !- Vertex 2 X-coordinate {m}
5.0, !- Vertex 2
Y-coordinate {m}
0.000000000000, !- Vertex 2 Z-coordinate {m}
0.000000000000, !- Vertex 3 X-coordinate {m}
0.000000000000, !- Vertex 3 Y-coordinate {m}
0.000000000000, !- Vertex 3 Z-coordinate {m}
0.000000000000, !- Vertex 4 X-coordinate {m}
0.000000000000, !- Vertex 4 Y-coordinate {m}
3.0;
!- Vertex 4 Z-coordinate {m}
BuildingSurface:Detailed,
north_int_wall_01, !- Name
Wall, !- Surface Type
Int_Wall, !- Construction Name
Th_ZONE_north, !- Zone Name
Adiabatic, !- Outside Boundary Condition
,
!- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
, !- View Factor to Ground
4, !- Number of Vertices
5.0, !- Vertex 1 X-coordinate {m}
0.000000000000, !-
Vertex 1 Y-coordinate {m}
3.0, !- Vertex 1 Z-coordinate {m}
5.0, !- Vertex 2 X-coordinate {m}
0.000000000000, !- Vertex 2 Y-coordinate {m}
0.000000000000, !- Vertex 2 Z-coordinate {m}
5.0, !- Vertex 3 X-coordinate {m}
5.0, !- Vertex 3 Y-coordinate {m}
0.000000000000, !- Vertex 3
Z-coordinate {m}
5.0, !- Vertex 4 X-coordinate {m}
5.0, !- Vertex 4 Y-coordinate {m}
3.0; !- Vertex 4 Z-coordinate {m}
BuildingSurface:Detailed,
north_int_wall_03, !- Name
Wall, !- Surface Type
Int_Wall, !- Construction Name
Th_ZONE_north, !- Zone Name
Adiabatic, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
, !- View Factor to Ground
4, !- Number of Vertices
0.000000000000, !- Vertex 1 X-coordinate {m}
5.0, !- Vertex 1 Y-coordinate {m}
3.0, !- Vertex 1 Z-coordinate {m}
0.000000000000, !- Vertex 2 X-coordinate {m}
5.0, !- Vertex 2 Y-coordinate {m}
0.000000000000, !- Vertex 2 Z-coordinate {m}
0.000000000000, !- Vertex 3 X-coordinate {m}
0.000000000000, !- Vertex 3 Y-coordinate {m}
0.000000000000, !- Vertex 3 Z-coordinate {m}
0.000000000000, !- Vertex 4 X-coordinate {m}
0.000000000000, !- Vertex 4 Y-coordinate {m}
3.0; !- Vertex 4 Z-coordinate {m}
BuildingSurface:Detailed,
north_ext_wall_01, !- Name
Wall, !- Surface Type
Ext_Wall, !- Construction Name
Th_ZONE_north, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
, !- View Factor to Ground
4, !- Number of Vertices
0.000000000000, !- Vertex 1 X-coordinate {m}
0.000000000000, !- Vertex 1 Y-coordinate {m}
3.0, !-
Vertex 1 Z-coordinate {m}
0.000000000000, !- Vertex 2 X-coordinate {m}
0.000000000000, !- Vertex 2 Y-coordinate {m}
0.000000000000, !- Vertex 2 Z-coordinate {m}
5.0, !- Vertex 3 X-coordinate {m}
0.000000000000, !- Vertex 3 Y-coordinate {m}
0.000000000000, !- Vertex 3 Z-coordinate {m}
5.0,
!- Vertex 4 X-coordinate {m}
0.000000000000, !- Vertex 4 Y-coordinate {m}
3.0; !- Vertex 4 Z-coordinate {m}
BuildingSurface:Detailed,
north_int_wall_02, !- Name
Wall, !- Surface Type
Int_Wall, !- Construction Name
Th_ZONE_north, !-
Zone Name
Adiabatic, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
, !- View Factor to Ground
4, !-
Number of Vertices
5.0, !- Vertex 1 X-coordinate {m}
5.0, !- Vertex 1 Y-coordinate {m}
3.0, !- Vertex 1 Z-coordinate {m}
5.0, !- Vertex 2 X-coordinate {m}
5.0, !- Vertex 2 Y-coordinate {m}
0.000000000000, !- Vertex 2 Z-coordinate {m}
0.000000000000, !- Vertex 3 X-coordinate {m}
5.0, !- Vertex 3 Y-coordinate {m}
0.000000000000, !- Vertex 3 Z-coordinate {m}
0.000000000000, !- Vertex 4 X-coordinate {m}
5.0, !- Vertex 4 Y-coordinate {m}
3.0; !- Vertex 4 Z-coordinate {m}
BuildingSurface:Detailed,
north_int_ceiling_01, !- Name
Ceiling, !- Surface Type
Int_Ceiling, !- Construction Name
Th_ZONE_north, !- Zone Name
Adiabatic, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind,
!- Wind Exposure
, !- View Factor to Ground
4, !- Number of Vertices
5.0, !- Vertex 1 X-coordinate {m}
0.000000000000, !- Vertex 1 Y-coordinate {m}
3.0, !- Vertex 1 Z-coordinate {m}
5.0, !- Vertex 2 X-coordinate {m}
5.0,
!- Vertex 2 Y-coordinate {m}
3.0, !- Vertex 2 Z-coordinate {m}
0.000000000000, !- Vertex 3 X-coordinate {m}
5.0, !- Vertex 3 Y-coordinate {m}
3.0, !- Vertex 3 Z-coordinate {m}
0.000000000000, !- Vertex 4 X-coordinate {m}
0.000000000000, !- Vertex 4 Y-coordinate {m}
3.0;
!- Vertex 4 Z-coordinate {m}
BuildingSurface:Detailed,
north_int_floor_01, !- Name
Floor, !- Surface Type
Int_Floor, !- Construction Name
Th_ZONE_north, !- Zone Name
Adiabatic, !- Outside Boundary Condition
,
!- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
, !- View Factor to Ground
4, !- Number of Vertices
0.000000000000, !- Vertex 1 X-coordinate {m}
0.000000000000,
!- Vertex 1 Y-coordinate {m}
0.000000000000, !- Vertex 1 Z-coordinate {m}
0.000000000000, !- Vertex 2 X-coordinate {m}
5.0, !- Vertex 2 Y-coordinate {m}
0.000000000000, !- Vertex 2 Z-coordinate {m}
5.0, !- Vertex 3 X-coordinate {m}
5.0, !- Vertex 3 Y-coordinate {m}
0.000000000000,
!- Vertex 3 Z-coordinate {m}
5.0, !- Vertex 4 X-coordinate {m}
0.000000000000, !- Vertex 4 Y-coordinate {m}
0.000000000000; !- Vertex 4 Z-coordinate {m}
BuildingSurface:Detailed,
south_int_wall_01, !- Name
Wall, !- Surface Type
Int_Wall,
!- Construction Name
Th_ZONE_south, !- Zone Name
Adiabatic, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
, !- View Factor to
Ground
4, !- Number of Vertices
5.0, !- Vertex 1 X-coordinate {m}
0.000000000000, !- Vertex 1 Y-coordinate {m}
3.0, !- Vertex 1 Z-coordinate {m}
5.0, !- Vertex 2 X-coordinate {m}
0.000000000000, !- Vertex 2 Y-coordinate {m}
0.000000000000, !-
Vertex 2 Z-coordinate {m}
5.0, !- Vertex 3 X-coordinate {m}
5.0, !- Vertex 3 Y-coordinate {m}
0.000000000000, !- Vertex 3 Z-coordinate {m}
5.0, !- Vertex 4 X-coordinate {m}
5.0, !- Vertex 4 Y-coordinate {m}
3.0; !- Vertex 4 Z-coordinate {m}
BuildingSurface:Detailed,
south_int_floor_01, !- Name
Floor, !- Surface Type
Int_Floor, !- Construction Name
Th_ZONE_south, !- Zone Name
Adiabatic, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
NoSun,
!- Sun Exposure
NoWind, !- Wind Exposure
, !- View Factor to Ground
4, !- Number of Vertices
5.0, !- Vertex 1 X-coordinate {m}
5.0, !- Vertex 1 Y-coordinate {m}
0.000000000000, !- Vertex 1 Z-coordinate {m}
5.0, !- Vertex 2 X-coordinate {m}
0.000000000000, !- Vertex 2 Y-coordinate {m}
0.000000000000, !- Vertex 2 Z-coordinate {m}
0.000000000000, !- Vertex 3 X-coordinate {m}
0.000000000000, !- Vertex 3 Y-coordinate {m}
0.000000000000, !- Vertex 3 Z-coordinate {m}
0.000000000000, !- Vertex 4
X-coordinate {m}
5.0, !- Vertex 4 Y-coordinate {m}
0.000000000000; !- Vertex 4 Z-coordinate {m}
BuildingSurface:Detailed,
south_int_ceiling_01, !- Name
Ceiling, !- Surface Type
Int_Ceiling, !- Construction Name
Th_ZONE_south, !- Zone Name
Adiabatic, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
, !- View Factor to Ground
4, !- Number of
Vertices
0.000000000000, !- Vertex 1 X-coordinate {m}
5.0, !- Vertex 1 Y-coordinate {m}
3.0, !- Vertex 1 Z-coordinate {m}
0.000000000000, !- Vertex 2 X-coordinate {m}
0.000000000000, !- Vertex 2 Y-coordinate {m}
3.0, !- Vertex 2 Z-coordinate {m}
5.0, !- Vertex 3 X-coordinate
{m}
0.000000000000, !- Vertex 3 Y-coordinate {m}
3.0, !- Vertex 3 Z-coordinate {m}
5.0, !- Vertex 4 X-coordinate {m}
5.0, !- Vertex 4 Y-coordinate {m}
3.0; !- Vertex 4 Z-coordinate {m}
BuildingSurface:Detailed,
south_int_wall_03, !- Name
Wall, !- Surface Type
Int_Wall, !- Construction Name
Th_ZONE_south, !- Zone Name
Adiabatic, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind,
!- Wind Exposure
, !- View Factor to Ground
4, !- Number of Vertices
0.000000000000, !- Vertex 1 X-coordinate {m}
5.0, !- Vertex 1 Y-coordinate {m}
3.0, !- Vertex 1 Z-coordinate {m}
0.000000000000, !- Vertex 2 X-coordinate {m}
5.0, !- Vertex 2 Y-coordinate {m}
0.000000000000, !- Vertex 2 Z-coordinate {m}
0.000000000000, !- Vertex 3 X-coordinate {m}
0.000000000000, !- Vertex 3 Y-coordinate {m}
0.000000000000, !- Vertex 3 Z-coordinate {m}
0.000000000000, !- Vertex 4 X-coordinate {m}
0.000000000000, !- Vertex 4 Y-coordinate {m}
3.0; !- Vertex 4 Z-coordinate {m}
BuildingSurface:Detailed,
south_int_wall_02, !- Name
Wall, !- Surface Type
Int_Wall, !- Construction Name
Th_ZONE_south, !- Zone Name
Adiabatic, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
, !- View Factor to Ground
4, !- Number of Vertices
5.0, !- Vertex 1 X-coordinate {m}
5.0, !- Vertex 1 Y-coordinate {m}
3.0, !- Vertex 1 Z-coordinate {m}
5.0, !- Vertex 2 X-coordinate {m}
5.0, !- Vertex 2 Y-coordinate {m}
0.000000000000, !- Vertex 2 Z-coordinate {m}
0.000000000000, !- Vertex 3 X-coordinate {m}
5.0, !- Vertex 3 Y-coordinate {m}
0.000000000000, !- Vertex 3 Z-coordinate {m}
0.000000000000, !- Vertex 4 X-coordinate {m}
5.0, !- Vertex 4 Y-coordinate {m}
3.0; !- Vertex 4 Z-coordinate {m}
BuildingSurface:Detailed,
south_ext_wall_01, !- Name
Wall, !- Surface Type
Ext_Wall, !- Construction Name
Th_ZONE_south, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
,
!- View Factor to Ground
4, !- Number of Vertices
0.000000000000, !- Vertex 1 X-coordinate {m}
0.000000000000, !- Vertex 1 Y-coordinate {m}
3.0, !- Vertex 1 Z-coordinate {m}
0.000000000000, !- Vertex 2 X-coordinate {m}
0.000000000000, !- Vertex 2 Y-coordinate {m}
0.000000000000, !- Vertex 2 Z-coordinate {m}
5.0, !- Vertex 3 X-coordinate {m}
0.000000000000, !- Vertex 3 Y-coordinate {m}
0.000000000000, !- Vertex 3 Z-coordinate {m}
5.0, !- Vertex 4 X-coordinate {m}
0.000000000000, !- Vertex 4 Y-coordinate {m}
3.0; !- Vertex 4 Z-coordinate {m}
!- =========== ALL OBJECTS IN CLASS: WINDOW ===========
Window,
east_ext_window_01, !- Name
Ext_Window, !- Construction Name
east_ext_wall_01, !- Building Surface Name
Ctrl_Shad, !- Shading Control Name
, !- Frame
and Divider Name
1, !- Multiplier
2.0, !- Starting X Coordinate {m}
1.0, !- Starting Z Coordinate {m}
3.0, !- Length {m}
1.0; !- Height {m}
Window,
west_ext_window_01, !- Name
Ext_Window, !- Construction Name
west_ext_wall_01, !- Building Surface Name
Ctrl_Shad, !- Shading Control Name
, !- Frame and Divider Name
1, !- Multiplier
2.0,
!- Starting X Coordinate {m}
1.0, !- Starting Z Coordinate {m}
3.0, !- Length {m}
1.0; !- Height {m}
Window,
north_ext_window_01, !- Name
Ext_Window, !- Construction Name
north_ext_wall_01,
!- Building Surface Name
Ctrl_Shad, !- Shading Control Name
, !- Frame and Divider Name
1, !- Multiplier
2.0, !- Starting X Coordinate {m}
1.0, !- Starting Z Coordinate {m}
3.0,
!- Length {m}
1.0; !- Height {m}
Window,
south_ext_window_01, !- Name
Ext_Window, !- Construction Name
south_ext_wall_01, !- Building Surface Name
Ctrl_Shad, !- Shading Control Name
,
!- Frame and Divider Name
1, !- Multiplier
2.0, !- Starting X Coordinate {m}
1.0, !- Starting Z Coordinate {m}
3.0, !- Length {m}
1.0; !- Height {m}
!- =========== ALL OBJECTS IN CLASS: ZONEINFILTRATION:DESIGNFLOWRATE ===========
ZoneInfiltration:DesignFlowRate,
Infiltration_const, !- Name
Zone_List, !- Zone or ZoneList Name
Sched_Always_ON, !- Schedule Name
AirChanges/Hour, !- Design Flow Rate Calculation Method
,
!- Design Flow Rate {m3/s}
, !- Flow per Zone Floor Area {m3/s-m2}
, !- Flow per Exterior Surface Area {m3/s-m2}
0, !- Air Changes per Hour {1/hr}
1, !- Constant Term Coefficient
, !-
Temperature Term Coefficient
, !- Velocity Term Coefficient
; !- Velocity Squared Term Coefficient
!- =========== ALL OBJECTS IN CLASS: MATERIAL ===========
Material,
Gypsum or plaster board - 9.5mm, !- Name
MediumSmooth, !-
Roughness
0.0095, !- Thickness {m}
0.58, !- Conductivity {W/m-K}
800, !- Density {kg/m3}
1090; !- Specific Heat {J/kg-K}
Material,
Out_Insulation, !- Name
MediumRough,
!- Roughness
0.01, !- Thickness {m}
0.023333333, !- Conductivity {W/m-K}
136.6666667, !- Density {kg/m3}
2000; !- Specific Heat {J/kg-K}
Material,
Ext_Wall_Layer, !- Name
MediumRough, !- Roughness
0.69, !- Thickness {m}
0.3, !- Conductivity {W/m-K}
1133.333333, !- Density {kg/m3}
600; !- Specific Heat {J/kg-K}
Material,
Int_Wall_Layer, !- Name
MediumRough, !- Roughness
0.5, !- Thickness {m}
5, !- Conductivity {W/m-K}
1133.333333, !- Density {kg/m3}
600; !- Specific Heat {J/kg-K}
Material,
CeilFloorLayer,
!- Name
MediumRough, !- Roughness
0.2, !- Thickness {m}
5, !- Conductivity {W/m-K}
2066.666667, !- Density {kg/m3}
2000; !- Specific Heat {J/kg-K}
!- =========== ALL OBJECTS IN CLASS: MATERIAL:NOMASS ===========
Material:NoMass,
Carpet and fibrous pad, !- Name
Rough, !- Roughness
0.37; !- Thermal Resistance {m2-K/W}
!- =========== ALL OBJECTS IN CLASS: MATERIAL:AIRGAP ===========
Material:AirGap,
F04 Wall air space resistance, !- Name
0.15; !- Thermal Resistance {m2-K/W}
Material:AirGap,
F05 Ceiling air space resistance, !- Name
0.18; !- Thermal Resistance {m2-K/W}
!- =========== ALL OBJECTS IN CLASS: WINDOWMATERIAL:GLAZING ===========
WindowMaterial:Glazing,
CLEAR 3MM, !- Name
SpectralAverage, !- Optical Data Type
, !- Window Glass Spectral Data Set Name
0.003, !- Thickness {m}
0.837, !- Solar Transmittance at Normal Incidence
0.075, !- Front Side Solar Reflectance at Normal Incidence
0.075, !- Back Side Solar Reflectance at Normal Incidence
0.898, !- Visible Transmittance at Normal Incidence
0.081, !- Front Side Visible Reflectance at Normal Incidence
0.081, !- Back Side Visible Reflectance at Normal Incidence
0.0,
!- Infrared Transmittance at Normal Incidence
0.84, !- Front Side Infrared Hemispherical Emissivity
0.84, !- Back Side Infrared Hemispherical Emissivity
0.9; !- Conductivity {W/m-K}
WindowMaterial:Glazing,
LoE CLEAR 3MM Rev, !- Name
SpectralAverage, !- Optical Data Type
, !- Window Glass Spectral Data Set Name
0.003, !- Thickness {m}
0.630, !- Solar Transmittance at Normal Incidence
0.220, !- Front Side Solar Reflectance at Normal Incidence
0.190, !- Back Side Solar Reflectance at Normal
Incidence
0.850, !- Visible Transmittance at Normal Incidence
0.079, !- Front Side Visible Reflectance at Normal Incidence
0.056, !- Back Side Visible Reflectance at Normal Incidence
0.0, !- Infrared Transmittance at Normal Incidence
0.10, !- Front Side Infrared Hemispherical Emissivity
0.84, !- Back Side Infrared Hemispherical Emissivity
0.9; !- Conductivity {W/m-K}
!- =========== ALL OBJECTS IN CLASS: WINDOWMATERIAL:GAS ===========
WindowMaterial:Gas,
AIR 13MM, !- Name
Air,
!- Gas Type
0.0127; !- Thickness {m}
!- =========== ALL OBJECTS IN CLASS: WINDOWMATERIAL:SHADE ===========
WindowMaterial:Shade,
HIGH REFLECT - LOW TRANS SHADE, !- Name
0.1, !- Solar Transmittance {dimensionless}
0.8,
!- Solar Reflectance {dimensionless}
0.1, !- Visible Transmittance {dimensionless}
0.8, !- Visible Reflectance {dimensionless}
0.9, !- Infrared Hemispherical Emissivity {dimensionless}
0.0, !- Infrared Transmittance {dimensionless}
0.005, !- Thickness {m}
0.1, !- Conductivity {W/m-K}
0.05, !- Shade to Glass Distance {m}
0.5, !- Top Opening Multiplier
0.5, !- Bottom Opening Multiplier
0.5, !- Left-Side Opening Multiplier
0.5,
!- Right-Side Opening Multiplier
0.0; !- Airflow Permeability {dimensionless}
!- =========== ALL OBJECTS IN CLASS: CONSTRUCTION ===========
Construction,
Ext_Wall, !- Name
Gypsum or plaster board - 9.5mm, !- Outside Layer
Out_Insulation, !- Layer
2
Ext_Wall_Layer, !- Layer 3
Gypsum or plaster board - 9.5mm; !- Layer 4
Construction,
Int_Floor, !- Name
Carpet and fibrous pad, !- Outside Layer
CeilFloorLayer; !- Layer 2
Construction,
Int_Ceiling,
!- Name
CeilFloorLayer, !- Outside Layer
Carpet and fibrous pad; !- Layer 2
Construction,
Int_Wall, !- Name
Gypsum or plaster board - 9.5mm, !- Outside Layer
Int_Wall_Layer, !- Layer 2
Gypsum or plaster board - 9.5mm; !- Layer 3
Construction,
Ext_Window, !- Name
CLEAR 3MM, !- Outside Layer
AIR 13MM, !- Layer 2
LoE CLEAR 3MM Rev; !- Layer 3
!- =========== ALL OBJECTS IN CLASS: WINDOWPROPERTY:SHADINGCONTROL ===========
WindowProperty:ShadingControl,
Ctrl_Shad, !- Name
ExteriorShade, !- Shading Type
, !- Construction with Shading Name
OnIfHighSolarOnWindow, !- Shading Control Type
, !- Schedule Name
120, !- Setpoint {W/m2, W or deg C}
No, !- Shading Control Is Scheduled
No, !- Glare Control Is Active
HIGH REFLECT - LOW TRANS SHADE, !- Shading Device Material Name
FixedSlatAngle, !- Type of Slat Angle Control for Blinds
; !- Slat Angle Schedule Name
!- =========== ALL OBJECTS IN CLASS:
ZONECONTROL:THERMOSTAT ===========
ZoneControl:Thermostat,
The_Thermostat, !- Name
Zone_List, !- Zone or ZoneList Name
Sched_Thermostat, !- Control Type Schedule Name
ThermostatSetpoint:SingleHeating, !- Control 1 Object Type
The_Thermostat; !- Control 1 Name
!- =========== ALL OBJECTS IN CLASS: THERMOSTATSETPOINT:SINGLEHEATING ===========
ThermostatSetpoint:SingleHeating,
The_Thermostat, !- Name
SP_Heating; !- Setpoint Temperature Schedule Name
!- =========== ALL OBJECTS IN CLASS: ZONEHVAC:IDEALLOADSAIRSYSTEM ===========
ZoneHVAC:IdealLoadsAirSystem,
Ideal_East, !- Name
Sched_Always_ON, !- Availability Schedule Name
Th_ZONE_east_Supply Inlet, !- Zone Supply Air Node Name
, !- Zone Exhaust Air Node Name
50, !- Maximum Heating Supply Air Temperature {C}
13, !- Minimum Cooling Supply Air Temperature {C}
0.0156, !- Maximum Heating Supply Air Humidity Ratio {kgWater/kgDryAir}
0.0077, !- Minimum Cooling Supply Air Humidity Ratio {kgWater/kgDryAir}
LimitCapacity, !- Heating Limit
, !- Maximum Heating Air Flow Rate {m3/s}
50000, !- Maximum Sensible Heating Capacity {W}
LimitCapacity,
!- Cooling Limit
, !- Maximum Cooling Air Flow Rate {m3/s}
50000, !- Maximum Total Cooling Capacity {W}
, !- Heating Availability Schedule Name
, !- Cooling Availability Schedule Name
ConstantSensibleHeatRatio, !- Dehumidification Control Type
0.7, !- Cooling Sensible Heat Ratio {dimensionless}
None, !- Humidification Control Type
, !- Design Specification Outdoor Air Object Name
, !- Outdoor Air Inlet Node Name
None, !- Demand Controlled Ventilation Type
NoEconomizer,
!- Outdoor Air Economizer Type
None, !- Heat Recovery Type
0.7, !- Sensible Heat Recovery Effectiveness {dimensionless}
0.65; !- Latent Heat Recovery Effectiveness {dimensionless}
ZoneHVAC:IdealLoadsAirSystem,
Ideal_West, !- Name
Sched_Always_ON,
!- Availability Schedule Name
Th_ZONE_west_Supply Inlet, !- Zone Supply Air Node Name
, !- Zone Exhaust Air Node Name
50, !- Maximum Heating Supply Air Temperature {C}
13, !- Minimum Cooling Supply Air Temperature {C}
0.0156, !- Maximum Heating Supply Air Humidity Ratio {kgWater/kgDryAir}
0.0077, !- Minimum Cooling Supply Air Humidity Ratio {kgWater/kgDryAir}
LimitCapacity, !- Heating Limit
, !- Maximum Heating Air Flow Rate {m3/s}
50000, !- Maximum Sensible Heating Capacity {W}
LimitCapacity, !- Cooling Limit
, !- Maximum Cooling Air
Flow Rate {m3/s}
50000, !- Maximum Total Cooling Capacity {W}
, !- Heating Availability Schedule Name
, !- Cooling Availability Schedule Name
ConstantSensibleHeatRatio, !- Dehumidification Control Type
0.7, !- Cooling Sensible Heat Ratio {dimensionless}
None,
!- Humidification Control Type
, !- Design Specification Outdoor Air Object Name
, !- Outdoor Air Inlet Node Name
None, !- Demand Controlled Ventilation Type
NoEconomizer, !- Outdoor Air Economizer Type
None, !- Heat Recovery Type
0.7, !- Sensible Heat Recovery Effectiveness {dimensionless}
0.65; !- Latent Heat Recovery Effectiveness {dimensionless}
ZoneHVAC:IdealLoadsAirSystem,
Ideal_North, !- Name
Sched_Always_ON, !- Availability Schedule Name
Th_ZONE_north_Supply Inlet, !- Zone Supply Air Node Name
, !- Zone Exhaust Air Node Name
50, !- Maximum Heating Supply Air Temperature {C}
13, !- Minimum Cooling Supply Air Temperature {C}
0.0156, !- Maximum Heating Supply Air Humidity Ratio {kgWater/kgDryAir}
0.0077, !- Minimum Cooling Supply Air Humidity Ratio {kgWater/kgDryAir}
LimitCapacity, !- Heating Limit
, !- Maximum Heating Air Flow Rate {m3/s}
50000, !- Maximum Sensible Heating Capacity {W}
LimitCapacity, !- Cooling Limit
, !- Maximum Cooling Air Flow Rate {m3/s}
50000, !- Maximum Total Cooling Capacity
{W}
, !- Heating Availability Schedule Name
, !- Cooling Availability Schedule Name
ConstantSensibleHeatRatio, !- Dehumidification Control Type
0.7, !- Cooling Sensible Heat Ratio {dimensionless}
None, !- Humidification Control Type
,
!- Design Specification Outdoor Air Object Name
, !- Outdoor Air Inlet Node Name
None, !- Demand Controlled Ventilation Type
NoEconomizer, !- Outdoor Air Economizer Type
None, !- Heat Recovery Type
0.7, !- Sensible Heat Recovery Effectiveness
{dimensionless}
0.65; !- Latent Heat Recovery Effectiveness {dimensionless}
ZoneHVAC:IdealLoadsAirSystem,
Ideal_South, !- Name
Sched_Always_ON, !- Availability Schedule Name
Th_ZONE_south_Supply Inlet, !- Zone Supply Air Node Name
, !- Zone Exhaust Air Node Name
50, !- Maximum Heating Supply Air Temperature {C}
13, !- Minimum Cooling Supply Air Temperature {C}
0.0156, !- Maximum Heating Supply Air Humidity Ratio {kgWater/kgDryAir}
0.0077, !- Minimum Cooling Supply Air Humidity Ratio {kgWater/kgDryAir}
LimitCapacity, !- Heating Limit
,
!- Maximum Heating Air Flow Rate {m3/s}
50000, !- Maximum Sensible Heating Capacity {W}
LimitCapacity, !- Cooling Limit
, !- Maximum Cooling Air Flow Rate {m3/s}
50000, !- Maximum Total Cooling Capacity {W}
, !- Heating Availability Schedule
Name
, !- Cooling Availability Schedule Name
ConstantSensibleHeatRatio, !- Dehumidification Control Type
0.7, !- Cooling Sensible Heat Ratio {dimensionless}
None, !- Humidification Control Type
, !- Design Specification Outdoor Air Object Name
,
!- Outdoor Air Inlet Node Name
None, !- Demand Controlled Ventilation Type
NoEconomizer, !- Outdoor Air Economizer Type
None, !- Heat Recovery Type
0.7, !- Sensible Heat Recovery Effectiveness {dimensionless}
0.65; !- Latent Heat Recovery Effectiveness
{dimensionless}
!- =========== ALL OBJECTS IN CLASS: ZONEHVAC:EQUIPMENTLIST ===========
ZoneHVAC:EquipmentList,
EQ_List_East_Zone, !- Name
ZoneHVAC:IdealLoadsAirSystem, !- Zone Equipment 1 Object Type
Ideal_East, !- Zone Equipment 1 Name
1, !- Zone Equipment 1 Cooling
Sequence
1; !- Zone Equipment 1 Heating or No-Load Sequence
ZoneHVAC:EquipmentList,
EQ_List_West_Zone, !- Name
ZoneHVAC:IdealLoadsAirSystem, !- Zone Equipment 1 Object Type
Ideal_West, !- Zone Equipment 1 Name
1, !- Zone Equipment 1 Cooling Sequence
1; !- Zone Equipment 1 Heating or No-Load Sequence
ZoneHVAC:EquipmentList,
EQ_List_North_Zone, !- Name
ZoneHVAC:IdealLoadsAirSystem, !- Zone Equipment 1 Object Type
Ideal_North, !- Zone Equipment 1 Name
1, !- Zone Equipment 1 Cooling Sequence
1;
!- Zone Equipment 1 Heating or No-Load Sequence
ZoneHVAC:EquipmentList,
EQ_List_South_Zone, !- Name
ZoneHVAC:IdealLoadsAirSystem, !- Zone Equipment 1 Object Type
Ideal_South, !- Zone Equipment 1 Name
1, !- Zone Equipment 1 Cooling Sequence
1; !- Zone Equipment 1 Heating
or No-Load Sequence
!- =========== ALL OBJECTS IN CLASS: ZONEHVAC:EQUIPMENTCONNECTIONS ===========
ZoneHVAC:EquipmentConnections,
Th_ZONE_east, !- Name
EQ_List_East_Zone, !- Zone Conditioning Equipment List Name
Th_ZONE_east_Supply Inlet, !- Zone Air Inlet Node or NodeList Name
, !-
Zone Air Exhaust Node or NodeList Name
Th_ZONE_east_Air Node, !- Zone Air Node Name
Th_ZONE_east_Return Outlet; !- Zone Return Air Node Name
ZoneHVAC:EquipmentConnections,
Th_ZONE_west, !- Name
EQ_List_West_Zone, !- Zone Conditioning Equipment List Name
Th_ZONE_west_Supply Inlet, !- Zone Air Inlet Node or NodeList Name
,
!- Zone Air Exhaust Node or NodeList Name
Th_ZONE_west_Air Node, !- Zone Air Node Name
Th_ZONE_west_Return Outlet; !- Zone Return Air Node Name
ZoneHVAC:EquipmentConnections,
Th_ZONE_north, !- Name
EQ_List_North_Zone, !- Zone Conditioning Equipment List Name
Th_ZONE_north_Supply Inlet, !- Zone Air Inlet Node or NodeList Name
,
!- Zone Air Exhaust Node or NodeList Name
Th_ZONE_north_Air Node, !- Zone Air Node Name
Th_ZONE_north_Return Outlet; !- Zone Return Air Node Name
ZoneHVAC:EquipmentConnections,
Th_ZONE_south, !- Name
EQ_List_South_Zone, !- Zone Conditioning Equipment List Name
Th_ZONE_south_Supply Inlet, !- Zone Air Inlet Node or NodeList Name
,
!- Zone Air Exhaust Node or NodeList Name
Th_ZONE_south_Air Node, !- Zone Air Node Name
Th_ZONE_south_Return Outlet; !- Zone Return Air Node Name
Schedule:Compact,
Sched_Thermostat, !- Name
Limit_Fraction, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: Weekdays SummerDesignDay, !- Field 2
Until:24:00, !- Field 3
1, !- Field 12
For: Weekends WinterDesignDays AllOtherDays, !- Field 13
Until:24:00, !- Field 14
1; !- Field 11
!- =========== ALL OBJECTS IN CLASS: PEOPLE ===========
People,
Load_People, !- Name
Zone_List, !- Zone or ZoneList Name
Sched_People, !- Number of People Schedule Name
Area/Person, !- Number of People Calculation Method
, !- Number of People
,
!- People per Zone Floor Area {person/m2}
9.7, !- Zone Floor Area per Person {m2/person}
0.2, !- Fraction Radiant
autocalculate, !- Sensible Heat Fraction
Sched_Activity, !- Activity Level Schedule Name
0.0000000382, !- Carbon Dioxide Generation Rate {m3/s-W}
Yes,
!- Enable ASHRAE 55 Comfort Warnings
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
, !- Surface Name/Angle Factor List Name
Sched_WorkEff, !- Work Efficiency Schedule Name
Sched_Clothing, !- Clothing Insulation Schedule Name
Sched_Air_Velo, !- Air Velocity Schedule Name
Fanger,
!- Thermal Comfort Model 1 Type
Pierce, !- Thermal Comfort Model 2 Type
KSU, !- Thermal Comfort Model 3 Type
AdaptiveASH55, !- Thermal Comfort Model 4 Type
AdaptiveCEN15251; !- Thermal Comfort Model 5 Type
!- =========== ALL OBJECTS IN CLASS: LIGHTS ===========
Lights,
Load_Lights, !- Name
Zone_List, !- Zone or ZoneList Name
Sched_Lights, !- Schedule Name
Watts/Area, !- Design Level Calculation Method
, !- Lighting Level {W}
15,
!- Watts per Zone Floor Area {W/m2}
, !- Watts per Person {W/person}
0, !- Return Air Fraction
0.6, !- Fraction Radiant
0.4, !- Fraction Visible
0, !- Fraction Replaceable
General, !- End-Use Subcategory
No; !- Return Air Fraction Calculated from Plenum Temperature
!- =========== ALL OBJECTS IN CLASS: ELECTRICEQUIPMENT ===========
ElectricEquipment,
Equip_Non_Permanent, !- Name
Zone_List, !- Zone or ZoneList Name
Sched_Equip, !- Schedule Name
Watts/Area, !- Design Level Calculation Method
, !- Design Level {W}
8, !- Watts per Zone Floor Area {W/m2}
, !- Watts per Person {W/person}
0, !- Fraction
Latent
0.1, !- Fraction Radiant
0.9, !- Fraction Lost
General; !- End-Use Subcategory
ElectricEquipment,
Equip_Permanent, !- Name
Zone_List, !- Zone or ZoneList Name
Sched_Always_ON,
!- Schedule Name
Watts/Area, !- Design Level Calculation Method
, !- Design Level {W}
1, !- Watts per Zone Floor Area {W/m2}
, !- Watts per Person {W/person}
0, !- Fraction Latent
0.1, !- Fraction Radiant
0.9, !- Fraction Lost
General; !- End-Use Subcategory
!- =========== ALL OBJECTS IN CLASS: SCHEDULE:COMPACT ===========
Schedule:Compact,
Sched_People, !- Name
Limit_Fraction, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: Weekdays SummerDesignDay, !- Field 2
Until: 07:00, !- Field 3
0, !- Field 4
Until: 09:00, !- Field 5
0.8, !- Field 6
Until:
17:00, !- Field 7
1, !- Field 8
Until: 19:00, !- Field 9
0.8, !- Field 10
Until: 24:00, !- Field 11
0, !- Field 12
For: Weekends WinterDesignDays AllOtherDays, !- Field 13
Until: 24:00, !- Field 14
0; !- Field 11
Schedule:Compact,
Sched_Always_ON, !- Name
On/Off, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: WinterDesignDay, !- Field 2
Until:
24:00, !- Field 3
0, !- Field 4
For: Weekdays Weekends SummerDesignDay AllOtherDays, !- Field 5
Until: 24:00, !- Field 6
1; !- Field 7
Schedule:Compact,
Sched_Equip, !- Name
Limit_Fraction, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: Weekdays SummerDesignDay, !- Field 2
Until: 08:00, !- Field 3
0, !- Field 4
Until: 18:00, !- Field 5
1, !- Field 6
Until: 24:00, !- Field 7
0, !- Field 8
For: Weekends WinterDesignDays AllOtherDays, !- Field 9
Until: 24:00, !- Field 10
0; !- Field 11
Schedule:Compact,
Sched_Lights, !- Name
Limit_Fraction, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: Weekdays SummerDesignDay, !- Field 2
Until: 08:00, !- Field 3
0, !- Field 4
Until: 18:00, !- Field 5
1, !- Field 6
Until: 24:00, !- Field 7
0, !- Field 8
For: Weekends WinterDesignDays AllOtherDays, !- Field 9
Until: 24:00, !- Field 10
0; !- Field 11
Schedule:Compact,
Sched_Activity, !- Name
Limit_Metabolic, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: Weekdays SummerDesignDay, !- Field 2
Until: 07:00, !- Field 3
0, !- Field 4
Until: 19:00, !- Field 5
70, !- Field 6
Until:
24:00, !- Field 7
0, !- Field 8
For: Weekends WinterDesignDays AllOtherDays, !- Field 9
Until: 24:00, !- Field 10
0; !- Field 11
Schedule:Compact,
Sched_WorkEff, !- Name
Limit_Fraction,
!- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: Weekdays SummerDesignDay, !- Field 2
Until: 07:00, !- Field 3
0, !- Field 4
Until: 19:00, !- Field 5
1, !- Field 6
Until: 24:00,
!- Field 7
0, !- Field 8
For: Weekends WinterDesignDays AllOtherDays, !- Field 9
Until: 24:00, !- Field 10
0; !- Field 11
Schedule:Compact,
Sched_Clothing, !- Name
Limit_Clothing, !- Schedule
Type Limits Name
Through: 04/30, !- Field 1
For: Weekdays SummerDesignDay, !- Field 2
Until: 07:00, !- Field 3
0, !- Field 4
Until: 19:00, !- Field 5
1, !- Field 6
Until: 24:00, !- Field
7
0, !- Field 8
For: Weekends WinterDesignDays AllOtherDays, !- Field 9
Until: 24:00, !- Field 10
0, !- Field 11
Through: 09/30, !- Field 1
For: Weekdays SummerDesignDay, !- Field 2
Until: 07:00, !- Field 3
0, !- Field 4
Until: 19:00, !- Field 5
0.5, !- Field 6
Until: 24:00, !- Field 7
0, !- Field 8
For: Weekends WinterDesignDays AllOtherDays, !- Field 9
Until: 24:00, !- Field
10
0, !- Field 11
Through: 12/31, !- Field 1
For: Weekdays SummerDesignDay, !- Field 2
Until: 07:00, !- Field 3
0, !- Field 4
Until: 19:00, !- Field 5
1, !-
Field 6
Until: 24:00, !- Field 7
0, !- Field 8
For: Weekends WinterDesignDays AllOtherDays, !- Field 9
Until: 24:00, !- Field 10
0; !- Field 11
Schedule:Compact,
Sched_Air_Velo, !-
Name
Limit_Air_Velo, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: Weekdays SummerDesignDay, !- Field 2
Until: 07:00, !- Field 3
0, !- Field 4
Until: 19:00, !- Field 5
0.1, !- Field
6
Until: 24:00, !- Field 7
0, !- Field 8
For: Weekends WinterDesignDays AllOtherDays, !- Field 9
Until: 24:00, !- Field 10
0; !- Field 11
Schedule:Compact,
SP_Heating, !-
Name
Limit_Setpoints, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: Weekdays WinterDesignDay, !- Field 2
Until: 07:00, !- Field 3
20, !- Field 4
Until: 19:00, !- Field 5
22, !- Field 6
Until: 24:00, !- Field 7
20, !- Field 8
For: Weekends SummerDesignDay AllOtherDays, !- Field 9
Until: 24:00, !- Field 10
18; !- Field 11
Schedule:Compact,
SP_Cooling, !- Name
Limit_Setpoints, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: Weekdays SummerDesignDay, !- Field 2
Until: 07:00, !- Field 3
28, !- Field 4
Until: 19:00, !- Field 5
26, !- Field 6
Until: 24:00, !- Field 7
28, !- Field 8
For: Weekends WinterDesignDay AllOtherDays, !- Field 9
Until: 24:00, !- Field 10
32; !- Field 11
!- =========== ALL OBJECTS IN CLASS: OUTPUT:VARIABLEDICTIONARY ===========
Output:VariableDictionary,
IDF; !- Key Field
!- =========== ALL OBJECTS IN CLASS: OUTPUT:CONSTRUCTIONS ===========
Output:Constructions,
Constructions, !- Details Type 1
Materials; !- Details Type 2
!- =========== ALL OBJECTS IN CLASS: OUTPUT:TABLE:SUMMARYREPORTS ===========
Output:Table:SummaryReports,
AllSummary, !- Report 1 Name
ZoneCoolingSummaryMonthly, !- Report 2 Name
ZoneHeatingSummaryMonthly, !- Report 3 Name
WindowZoneSummaryMonthly,!- Report 4 Name
WindowEnergyReportMonthly, !- Report 5 Name
WindowEnergyZoneSummaryMonthly; !- Report 6 Name
!- =========== ALL OBJECTS IN CLASS: OUTPUTCONTROL:TABLE:STYLE ===========
OutputControl:Table:Style,
All, !- Column Separator
JtoKWH; !- Unit Conversion
!- =========== ALL OBJECTS IN CLASS: OUTPUT:SQLITE ===========
Output:SQLite,
SimpleAndTabular; !- Option Type
!- =========== ALL OBJECTS IN CLASS: OUTPUT:VARIABLE ===========
Output:Variable,
*, !- Key Value
Zone Mean Air Temperature, !- Variable Name
Hourly; !- Reporting Frequency
Output:Variable,
*, !- Key Value
Zone Operative Temperature, !- Variable Name
Hourly; !- Reporting Frequency
Output:Variable,
*, !- Key
Value
Ideal Loads Total Heating Rate, !- Variable Name
Hourly; !- Reporting Frequency
Output:Variable,
*, !- Key Value
Ideal Loads Total Cooling Energy, !- Variable Name
Hourly; !- Reporting Frequency
Output:Variable,
*, !- Key Value
Outdoor Dry Bulb, !- Variable Name
Hourly; !- Reporting Frequency
On Wednesday, January 15, 2014 10:53 PM, Jeremiah Crossett <jcrossett@xxxxxxxxxxxxxxx> wrote:
If you complied your own version of E+, and left out the sqllight libraries it could cause this--
Curios about your UI..
Jeremiah D. Crossett | Senior Analyst | Phase Change Energy Solutions
On Wed, Jan 15, 2014 at 1:07 PM, <maier.heinrich@xxxxxxxxx> wrote:
Hi guys,I`ve written a user interface that creates an valid idf file. if i process the file with EP-Launch, all type of files are created except for the SQLite File.
In my file i`ve got the following output definition:!- =========== ALL OBJECTS IN CLASS: OUTPUT:SQLITE ===========Output:SQLite,SimpleAndTabular; !- Option TypeIs there anything else I have to consider when i push the "Simulate"-Button?Best Regards,Rick
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___