Re: [EnergyPlus_Support] EMS error ** Severe ** Invalid Output:Variable or Output:Meter Index Key Name

[<jeannieboef@xxxxxxxxx>]

Look here:

https://groups.yahoo.com/neo/groups/EnergyPlus_Support/conversations/messages/30101

The first part of the EMS is global. The second is the code program for one zone (118129). I used a macro to create this for all zones. In each zone the windows were broken down into two groups (large window & small window), but I left a third group in the EMS that does not get used.

One last point...I modelled the closing temperature sensor as "air temp" not operative, because I could not afford the unmet load hours as it was for LEED.

__._,_.___

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___