[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [EnergyPlus_Support] Error and crash in this .idf
Well, at the moment I'm already using the e+ launcher. That's not a problem...
Maybe I was not vary clear in my first post.
I created the original model with DB and than I run it in E+ with the launcher, everything was ok. The model crated via DB had not a naturally vented roof. I added it through E+ launcher. I'm pretty sure about how to do this operation, I tried it successfully other times. Unfortunately, after having implemented that on the model I have this error. The word "cavity" is the name I chase for the object surfaceproperty:othersideconditionmodel.
On Tuesday, March 11, 2014 8:31 PM, Marco Aldegheri <m.aldegheri@xxxxxxxxx> wrote:
Thanks for the reply.
Maybe my inexperience makes me uneasy... I checked the surface in the buildingsurface:detailed list and it is correcly matched with the external boundary conditions (cavity)... In addition to this i don't know where to check and in particular how to check. I created the model in designbuilder and the surface is parto of a common slope roof...
Any suggestion?
On Tuesday, March 11, 2014 8:00 PM, Edward G. Lyon <eglyon@xxxxxxx> wrote:
The error message seems reasonably clear, E+ doesnâ??t think this surface has air around it. Make sure the surface description calls this a roof and not a floor and that it is exposed to the outside. Check the orientation, although that typically generates other warnings.
Also check your other airflownetwork objects, you need a control, a crack type, and an outside surface. E+ will sometimes generate error messages when related objects are missing or incorrectly specified.
Ned Lyon, P.E. (MA, WV)
Staff Consultant
SIMPSON GUMPERTZ & HEGER
781.907.9000 main
781.907.9350 direct
617.285.2162 mobile
781.907.9009 fax
www.sgh.com
From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of m.aldegheri@xxxxxxxxx
Sent: Tuesday, March 11, 2014 2:20 PM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: [EnergyPlus_Support] Error and crash in this .idf
Dear friends,
I don't know why but after adding a vented roof in this .idf (which worked without problems) Energy plus crashes during a run and the error log shows this:
** Severe ** GetAirflowNetworkInput: AirflowNetwork:MultiZone:Surface: Invalid Surface Name = P4:P4%A12ZN6U_ROOF_6_0_0
** ~~~ ** This type of surface (has ground, etc exposure) cannot be used in the AiflowNetwork model.
I tried to check but I don't understand how to fix this error... It seems to be all right...
Moreover, I had problems uploading the idf so the only way is to download it from the link below.... Excuse me for that...
<http://www.speedyshare.com/dPj34/Modello-ITEA-10-03.idf>http://www.speedyshare.com/dPj34/Modello-ITEA-10-03.idf (click on the big title up)
Best regards,
Marco
__._,_.___
Primary EnergyPlus support is found at:
<http://energyplus.helpserve.com>http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
<http://www.energyplus.gov>http://www.energyplus.gov
The group web site is:
<http://groups.yahoo.com/group/EnergyPlus_Support/>http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
<http://geo.yahoo.com/serv?s=97476590/grpId=3387488/grpspId=1705007389/msgId=31492/stime=1394568483>
<https://groups.yahoo.com/group/EnergyPlus_Support;_ylc=X3oDMTJlNm03Y241BF9TAzk3MzU5NzE0BGdycElkAzMzODc0ODgEZ3Jwc3BJZAMxNzA1MDA3Mzg5BHNlYwN2dGwEc2xrA3ZnaHAEc3RpbWUDMTM5NDU2ODQ4Mw-->Visit Your Group
* <https://groups.yahoo.com/group/EnergyPlus_Support/members;_ylc=X3oDMTJmaWw4ZGx2BF9TAzk3MzU5NzE0BGdycElkAzMzODc0ODgEZ3Jwc3BJZAMxNzA1MDA3Mzg5BHNlYwN2dGwEc2xrA3ZtYnJzBHN0aW1lAzEzOTQ1Njg0ODM-?o=6>New Members 13
<https://groups.yahoo.com/;_ylc=X3oDMTJkMWx1bzYzBF9TAzk3NDc2NTkwBGdycElkAzMzODc0ODgEZ3Jwc3BJZAMxNzA1MDA3Mzg5BHNlYwNmdHIEc2xrA2dmcARzdGltZQMxMzk0NTY4NDgz><http://l.yimg.com/ru/static/images/yg/img/email/new_logo/logo-groups-137x15.png>
? <https://info.yahoo.com/privacy/us/yahoo/groups/details.html>Privacy ? <mailto:EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx?subject=Unsubscribe>Unsubscribe ? <https://info.yahoo.com/legal/us/yahoo/utos/terms/>Terms of Use
__,_._,___