[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] Calculating solar gains_error results


You are missing this object:
ZoneControl:Thermostat

This object assigns the thermostat to a zone. You have no thermostats as such. The systems remain off as there are no loads to meet.


2014-04-07 13:46 GMT+02:00 Art Cygne <<mailto:artcygne@xxxxxxxxx>artcygne@xxxxxxxxx>:
>  
> Hi
> 
> Both files attached. I thank you again for your time and help.   :)
> 
> M.
> El Lunes, 7 de abril, 2014 10:19 A.M., Jean Marais <<mailto:jeannieboef@xxxxxxxxx>jeannieboef@xxxxxxxxx> escribió:
>  
Nothing in the err file of note. please send me your idf and html.
> 
> 
> 2014-04-06 19:26 GMT+02:00 Art Cygne <<mailto:artcygne@xxxxxxxxx>artcygne@xxxxxxxxx>:
>>  
Hi, thank you for your help. Attached the error file. I hope you can have a look to it!
>> 
>> My
>> El Domingo, 6 de abril, 2014 7:10 P.M., "<mailto:jeannieboef@xxxxxxxxx>jeannieboef@xxxxxxxxx" <<mailto:jeannieboef@xxxxxxxxx>jeannieboef@xxxxxxxxx> escribió:
>>  
It may be that studio is expecting another e+ version than you are simulating with and not declaring the output variables with new names. 
>> Please post your err file text.
>> 
>> Mit freundlichen Grü�en- Sent from my iPhone (excuse the brevity)
>> i. A.
Jean Marais
b.i.g. bechtold
Tel.   +49 30 6706662-23
>> On 06.04.2014, at 18:37, Art Cygne <<mailto:artcygne@xxxxxxxxx>artcygne@xxxxxxxxx> wrote:
>> 
>>>  
Hi
>>> 
>>> Thank you for your reply. I'm working with sketchup and open studio, I add the main materials and constructions in open studio and use the EP Editor to add the windows since they are complex fenestrations. I have illuminance map, a light control, and one luminaire in sketchup...even if I'm not interested in the electricity output. I specified the output variables in open studio:
>>> -exterior windows total transmitted beam solar radiation energy
>>> -exterior windows total transmitted beam solar radiation rate
>>> -total heat gain energy
>>> -zone interior windows total transmitted beam solar radiation energy
>>> -zone windows total heat gain energy
>>> -zone windows total heat loss energy
>>> -zone windows total transmitted solar radiation energy
>>> -zone windows total transmitted solar radiation rate
>>> Then use the IDF file in EP. I don't know how to specify the output in the EP Editor. All the results are zeroes (I look as HTML) heating, cooling, lighting and so on.
>>> I've got warnings but not severe errors. This might be a very simple solution but I cannot really figure it out. So I'll appreciate your help.
>>> Thanks in advance.
>>> 
>>> My
>>> El Domingo, 6 de abril, 2014 4:59 P.M., "<mailto:jeannieboef@xxxxxxxxx>jeannieboef@xxxxxxxxx" <<mailto:jeannieboef@xxxxxxxxx>jeannieboef@xxxxxxxxx> escribió:
>>>  
Which outputs did you specify, which return zero?
>>> 
>>> Mit freundlichen Grü�en- Sent from my iPhone (excuse the brevity)
>>> i. A.
Jean Marais
b.i.g. bechtold
Tel.   +49 30 6706662-23
>>> On 05.04.2014, at 23:10, Art Cygne <<mailto:artcygne@xxxxxxxxx><mailto:artcygne@xxxxxxxxx>artcygne@xxxxxxxxx> wrote:
>>> 
>>>>  
Hi everybody
>>>> I'm new using Energy Plus, and I'm trying to model an office room to obtain only solar gains and compare with different fenestration systems. I have all the walls adiabatic only one receives sun rays, no people & noA lights. The simulations runs but all my results are zero and I can't figure it out what is the problem. Since I'm beginner I suspect its a very easy thing, but I really don't know how to solve it.  
Can anybody give me a hint of what Am I missing?
>>>> I'd truly appreciate it!!
>>>> Mya
>>> 
>> 
>> 
> 
> 
> 
> 




__._,_.___

Primary EnergyPlus support is found at:
<http://energyplus.helpserve.com>http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
<http://www.energyplus.gov>http://www.energyplus.gov

The group web site is:
<http://groups.yahoo.com/group/EnergyPlus_Support/>http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.


<http://geo.yahoo.com/serv?s=97476590/grpId=3387488/grpspId=1705007389/msgId=31653/stime=1396900646>

<https://groups.yahoo.com/neo/groups/EnergyPlus_Support/info;_ylc=X3oDMTJldjk4YW5yBF9TAzk3MzU5NzE0BGdycElkAzMzODc0ODgEZ3Jwc3BJZAMxNzA1MDA3Mzg5BHNlYwN2dGwEc2xrA3ZnaHAEc3RpbWUDMTM5NjkwMDY0Ng-->Visit Your Group
* <https://groups.yahoo.com/neo/groups/EnergyPlus_Support/members/all;_ylc=X3oDMTJmY2Y4aDRsBF9TAzk3MzU5NzE0BGdycElkAzMzODc0ODgEZ3Jwc3BJZAMxNzA1MDA3Mzg5BHNlYwN2dGwEc2xrA3ZtYnJzBHN0aW1lAzEzOTY5MDA2NDY->New Members 7
<https://groups.yahoo.com/neo;_ylc=X3oDMTJkdWNuNzIzBF9TAzk3NDc2NTkwBGdycElkAzMzODc0ODgEZ3Jwc3BJZAMxNzA1MDA3Mzg5BHNlYwNmdHIEc2xrA2dmcARzdGltZQMxMzk2OTAwNjQ2><http://l.yimg.com/ru/static/images/yg/img/email/new_logo/logo-groups-137x15.png>
? <https://info.yahoo.com/privacy/us/yahoo/groups/details.html>Privacy ? <mailto:EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx?subject=Unsubscribe>Unsubscribe ? <https://info.yahoo.com/legal/us/yahoo/utos/terms/>Terms of Use
__,_._,___