Re: [EnergyPlus_Support] Radiant surface for 80%

[Geert Bellens <geert.bellens@xxxxxxxxxxxxxxxxxxxxxx>]

Jean,

Is it a solution to divide a floor into 2 surfaces, one with cooling  (80% of the surface) and the other without (20% of the surface) , without changing the rest of the model?


Best regards,


 
Geert Bellens

 



Jean Marais schreef op 9/04/2014 12:53:
>  
This is a tricky subject and I'm currently asking for clarification...however you will definately have to hard size your equipment. I have added an excel table which may (or may not)  be helpful. You need to keep an eye on the mass flowrates. Also attached is a table (thanks Jeremiah) where you can deturmine your construction's thermal diffusivity limits. This was all for hanged chilled ceilings, but you could apply this to concrete core activation. PS because a mean temperature is set for the entire surface, the activated part will be warmer and the unactivated part will be cooler. I have no idea what the net convective and radiative heat transfer rates will be in comparison to what is real. Furthermore, the condensation analysis (unless my pending clarification says otherwise regarding the 2D calculation) will be applied to the mean surface temperature, making inaccurate.
> 
> 
> 
> 2014-04-09 11:59 GMT+02:00 <<mailto:geert.bellens@xxxxxxxxxxxxxxxxxxxxxx>geert.bellens@xxxxxxxxxxxxxxxxxxxxxx>:
>>  
I have modeled an office with concrete core cooling and heating.

>> Apparently, the concrete is filled with ventilation ducts also. 

>> So 80% of the surface can be used as active cool or heating surface. No the 100% as modelled now.

>> What is the easiest way to limit the active surface for 80% without rebuilding my model from scratch ?

>> 
>> 
>> Best regards,

>> 
>> 
>> Geert

>> 
>> 
> 




__._,_.___

Primary EnergyPlus support is found at:
<http://energyplus.helpserve.com>http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
<http://www.energyplus.gov>http://www.energyplus.gov

The group web site is:
<http://groups.yahoo.com/group/EnergyPlus_Support/>http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.� Limit attachments to small files.

EnergyPlus Documentation is searchable.� Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.


<http://geo.yahoo.com/serv?s=97476590/grpId=3387488/grpspId=1705007389/msgId=31680/stime=1397042378>

<https://groups.yahoo.com/neo/groups/EnergyPlus_Support/info;_ylc=X3oDMTJlaDFyN2FqBF9TAzk3MzU5NzE0BGdycElkAzMzODc0ODgEZ3Jwc3BJZAMxNzA1MDA3Mzg5BHNlYwN2dGwEc2xrA3ZnaHAEc3RpbWUDMTM5NzA0MjM3OA-->Visit Your Group
* <https://groups.yahoo.com/neo/groups/EnergyPlus_Support/members/all;_ylc=X3oDMTJmY2Nndmw0BF9TAzk3MzU5NzE0BGdycElkAzMzODc0ODgEZ3Jwc3BJZAMxNzA1MDA3Mzg5BHNlYwN2dGwEc2xrA3ZtYnJzBHN0aW1lAzEzOTcwNDIzNzg->New Members 7
<https://groups.yahoo.com/neo;_ylc=X3oDMTJkMmIwNGt2BF9TAzk3NDc2NTkwBGdycElkAzMzODc0ODgEZ3Jwc3BJZAMxNzA1MDA3Mzg5BHNlYwNmdHIEc2xrA2dmcARzdGltZQMxMzk3MDQyMzc4><http://l.yimg.com/ru/static/images/yg/img/email/new_logo/logo-groups-137x15.png>
� <https://info.yahoo.com/privacy/us/yahoo/groups/details.html>Privacy � <mailto:EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx?subject=Unsubscribe>Unsubscribe � <https://info.yahoo.com/legal/us/yahoo/utos/terms/>Terms of Use
__,_._,___