The man to ask is Brent, but I don't think he's with the e+ team anymore.
Is the last email contact I have from him. I've not used any of the "custom" objects and you'll most likely have to ask the helpdesk support. This is a very advanced topic.
Mit freundlichen Grü�en- Sent from my iPhone (excuse the brevity)
i. A.
Jean Marais
b.i.g. bechtold
Tel. +49 30 6706662-23
On 18.06.2014, at 19:57, "jones.aidan.t@xxxxxxxxx [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx> wrote:
Hi,
I'm using the user-definedzone HVAC object and I have come across the following problem:
The outlet air temperature can be set from the inlet temperature, but the outlet water temperature cannot.
In EMS, a simple example:
set T_out_air = T_in_air,
set T_out_water = T_in_water,
The air assignment works fine, but the water does not.
I tried sending a temperature from a sensor elsewhere in the system, but that didn't work.
The line below works just fine, however.
set T_out_water = 31,
Has anyone come across a similar issue with the user-defined zone HVAC object?
I think there's a serious bug in the object. It looks to me as if the component can't read in plant (water) temperatures.
Thanks
Aidan
__._,_.___
Posted by: "jeannieboef@xxxxxxxxx" <jeannieboef@xxxxxxxxx>
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
__,_._,___