[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] EMS-Sensor





Thank you for the response. No, I used the people object and the output variable ( Zone Thermal Comfort Model Fanger PMV) as an input at EMS and the software is stopped. The  error is appeared because the EMS cannot find the variable.

On 25 Jun 2014 19:23, "Richard Raustad RRaustad@xxxxxxxxxxxx [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx> wrote:
 

Are you asking the simulation to calculate PMV? You would do that using the people object.

On 6/25/2014 2:08 PM, georgiou.geo13@xxxxxxxxx [EnergyPlus_Support] wrote:

Dear Group,


I am working on the EMS program and I faced an error. While all the variables that I call are ok, when I am calling the PMV to use it as a sensors, the program stopped with error that does not recognize the variable. I check the name and also its existence on the .rdd file and everything is right. Does anybody know why EMS cannot find the PMV?


Thank you in adnvace

George Georgiou


-- 
Richard Raustad
Senior Research Engineer
Florida Solar Energy Center
1679 Clearlake Road
Cocoa, FL 32922
Ph: (321)638-1454
http://www.fsec.ucf.edu/en/

Electric Vehicle Transportation Center
http://evtc.fsec.ucf.edu/



__._,_.___

Posted by: George Georgiou <georgiou.geo13@xxxxxxxxx>


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___