Re: [EnergyPlus_Support] ASHRAE 90.1 multi building modelling

["seanking.1970@xxxxxxxxxxx [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx>]

Hi Santiago,

Thank you very much for your very useful reply and document.

Best regards,

Sean

---In EnergyPlus_Support@xxxxxxxxxxxxxxx, <santiagogvelez@...> wrote :

Dear Sean, Are you using 90.1 RPM to demonstrate energy performance for LEED-NC v.2009? 

If this is the case, I believe you need to do an individual analysis for each building, since EAp2 and EAc1 are not part of the "Campus Credits" in a multiple building certification. This implies that each building needs to demonstrate EAp2 and EAc1.

Ref.: LEED application guide for multiple buildings

Cheers,

Santiago.

2014-07-25 11:39 GMT-03:00 seanking.1970@... [EnergyPlus_Support] <EnergyPlus_Support@xxxxxxxxxxxxxxx>:

 

Dear all,

If required to model multi buildings under ASHRAE 90.1 Appendix G PRM, what should I do? To model each building separately (own proposed and baseline designs and compare results) or model them together ASSUMING they are just parts of one assembled building? I suppose the later would be proper as the comparison should normally on total energy consumption rather than individually.

Any ideas on modelling this would be very much appreciated.

Sean

__._,_.___

---

Posted by: seanking.1970@xxxxxxxxxxx

---

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Visit Your Group

• New Members 11

• Privacy • Unsubscribe • Terms of Use

__,_._,___