[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [EnergyPlus_Support] Modeling Floors with Same Feature



Thanks Jim, Linda and Santiago.

The document is very helpful.

I'll delete this component blocks and set the surface to be adiabatic. The model was leaving the computer very slow. I'm sure this will be the best option.

Regards

Técg. Ivan Mezzacapa

Projetista  de Ar Condicionado / Consultor em Eficiência Energética


Celular: (11)9963-9326



To: EnergyPlus_Support@xxxxxxxxxxxxxxx
From: EnergyPlus_Support@xxxxxxxxxxxxxxx
Date: Fri, 1 Aug 2014 12:42:10 -0300
Subject: RE: [EnergyPlus_Support] Modeling Floors with Same Feature

 

Ivan, you don't have to add  shading component blocks to fill voids unless you want to take into account the self shading effect created by that area of the building.

Regards.

El ago 1, 2014 12:11 PM, "Jim Dirkes jim@xxxxxxxxxxxxxxxxxxxxxxxxxxx [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx> escribió:
 

Ivan,

I corresponded with Linda Lawrie of the E+ Development team a while ago.  She sent the attached document and I added some comments ? I hope it is helpful to you.

 

James V Dirkes II, PE, BEMP, LEED AP
www.buildingperformanceteam.com
Energy Analysis, Commissioning & Training Services
1631 Acacia Drive, Grand Rapids, MI 49504 USA
616 450 8653

 

From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx]
Sent: Friday, August 01, 2014 11:03 AM
To: energyplus_support@xxxxxxxxxxxxxxx
Subject: [EnergyPlus_Support] Modeling Floors with Same Feature

 

 

Hi everyone, i've a doubt.

 

I'm modeling a construction where some floors have the same properties. I'll use multiplier, but, i would like to know if i have to model this component blocks.

 

See the image.

Thanks for all!

 

 

 

Técg. Ivan Mezzacapa

Projetista  de Ar Condicionado / Consultor em Eficiência Energética



Celular: (11)9963-9326





__._,_.___
Posted by: Ivan Mezzacapa <ivan_slip@xxxxxxxxxxx>


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




__,_._,___