RE: [EnergyPlus_Support] FCU template

["'Yan, Bing' biy10001@xxxxxxxxxxxxxx [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx>]

Thanks for your reply.

My EnergyPlus is installed on the C drive, and I will try the idf files on other machines, hope it can work.

Thanks

Best

Bing Yan

Research assistant

Electrical & Computer Engineering

University of Connecticut

371 Fairfield Way, Unit 4157

Storrs, CT 06269-2157

---

From: EnergyPlus_Support@xxxxxxxxxxxxxxx [EnergyPlus_Support@xxxxxxxxxxxxxxx]
Sent: Sunday, August 17, 2014 2:25 PM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: Re: [EnergyPlus_Support] FCU template

 

Is your eplus installed directly on the C drive? We've had clients with the same problem. The idf was correctly generated and ran on other machines just fine, but on particular machines it gave problems. I would try running it on another machine.

Mit freundlichen Grüßen- Sent from my iPhone (excuse the brevity)

i. A.

Jean Marais

b.i.g. bechtold

Tel.   +49 30 6706662-23

On 17.08.2014, at 17:51, "'Yan, Bing' biy10001@xxxxxxxxxxxxxx [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx> wrote:

 

Dear all,

I established a simple building (4 rooms) model in DesignBuilder,  each room with a FCU (fan coil unit), and a chiller, a boiler and a cooling tower. The simulation results in DesignBuilder are fine, in summer design day, the indoor temperature is reduced to comfort ranges. But when I exported to EnergyPlus, the HVAC system does not work, the chilled water flow rate is 0. 

Is there anything else I need to do when I export the model to EnergyPlus.

Thanks very much, I have been stuck here for a long time.

Best

Bing Yan

Research assistant

Electrical & Computer Engineering

University of Connecticut

371 Fairfield Way, Unit 4157

Storrs, CT 06269-2157

__._,_.___

---

Posted by: "Yan, Bing" <biy10001@xxxxxxxxxxxxxx>

---

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Visit Your Group

• New Members 14

• Privacy • Unsubscribe • Terms of Use

__,_._,___