On 03.09.2014, at 19:07, "ar92@xxxxxxxxxxx [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx> wrote:
Hi fellow E+ modelers,
I am getting a weird error from E+. I am modeling bunch of zones with "AirTerminal:SingleDuct:ParallelPIU:Reheat" being fed with AHUs. The splitter node is connected to the outlet node from the PIU and I have checked the supply and return nodes on teh Airloop object very carefully.
The problem is that even though I see all the connections and nodes names right under the Equipment Connection object, I get an error for all my zones saying that the outlet node form the zonesplitter is not connected to any object/zone. It almost feels as if E+ is not reading the inlet node names (outlets from the PIU) in the equipment connection.
I have double checked several times. Originally, there was an "is Blank" error under the zonesplitter that was also weird given that all the node names were under the defined zonesplitter. I manually changed the inlet nodes on the zonesplitter and got ride of that first error but got stuck again.
Has anyone experience this before? I am using E+ 8.0 btw.
__._,_.___
Posted by: "jeannieboef@xxxxxxxxx" <jeannieboef@xxxxxxxxx>
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
__,_._,___