Re: [EnergyPlus_Support] Re: External convection coefficient

["Ana Paula Melo apaula.melo82@xxxxxxxxx [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx>]

Yes, I do have checked the Wind velocity.

Where I can find the information below in the EnergyPlys documentation? I have tried to find it at Input/Output manual, but with no sucess...

"Check the rain flags in the weather data.  Energyplus intentionally sets the exterior heat transfer coefficient to 1000 W/m2-K whenever it is raining (and then uses the ambient wetbulb instead of drybulb in the delta T).  The idea is if the surface is wet from rain its temperature will be close to the surrounding wetbulb temperature. If that is not acceptable, then you can modify the weather data so the rain flag is always set to no rain"

Thanks for all,

Ana Paula.

2014-09-03 9:27 GMT-03:00 fpasserini.tn@xxxxxxxxx [EnergyPlus_Support] <EnergyPlus_Support@xxxxxxxxxxxxxxx>:

 

Have you checked the wind velocity?

__._,_.___

---

Posted by: Ana Paula Melo <apaula.melo82@xxxxxxxxx>

---

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Visit Your Group

• New Members 14

• Privacy • Unsubscribe • Terms of Use

__,_._,___