[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Re: Define input to EMS module





To see this level you are going to have to use many timesteps per hour which will increase your calculation time.

 

The EMS application guide shows how to call Hour and Minute variables for ERL in Table 2 p5

 

you will probably need a long list of if statements

if Hour = xx && Minute > yy && Minute < zz then ......

 

you will probably have to modulate some actuator to reflect your demand requirements

 

 


 



__._,_.___

Posted by: allinson_louis@xxxxxxxxxxx


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___