Optimized shutdown...perhaps by slowly changing your setpoints?
Generally equipment in e+ is either on or off, e.g. Pumps don't ramp down whilst shutting off and there is no electrical spike when they start up. Cycling inefficiencies are usually built into efficiency curves or the models in some other way.
Mit freundlichen Grü�en- Sent from my iPhone (excuse the brevity)
i. A.
Jean Marais
b.i.g. bechtold
Tel. +49 30 6706662-23
On 09.10.2014, at 18:20, "Fakeha Sehar fakeha_s@xxxxxxxxx [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx> wrote:
I am currently using EMS to control lighting, HVAC but I also want to perform optimization, that is optimized shutdown of lighting and HVAC based on some constraints using EMS, please advise?
__._,_.___
Posted by: "jeannieboef@xxxxxxxxx" <jeannieboef@xxxxxxxxx>
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
__,_._,___