RE: [EnergyPlus_Support] E+ Lights Object: Fixture spec.

If you input two light objects in the same zone, this will give a fatal error.

Input just one light object, like jim said.

I think this the way.

To: EnergyPlus_Support@xxxxxxxxxxxxxxx
From: EnergyPlus_Support@xxxxxxxxxxxxxxx
Date: Tue, 28 Oct 2014 18:13:59 -0400
Subject: Re: [EnergyPlus_Support] E+ Lights Object: Fixture spec.

You could have a separate Lights object for each fixture.

But EnergyPlus aggregates all the lighting power (watts times schedule) at that time step at the zone level. So you can have a single Lights object that aggregates all your light fixtures. Or you could have a Lights object for each type of lighting (with different wattages/schedules).

For example, you could have a single Lights object for all lighting power in the zone:

Lights,
    AllLights,               !- Name
    Zone1,                   !- Zone or ZoneList Name
    OfficeLights,            !- Schedule Name
    LightingLevel,           !- Design Level Calculation Method
    ,                        !- Lighting Level {W}
    0.9,                     !- Watts per Zone Floor Area {W/m2}
    ,                        !- Watts per Person {W/person}
    ,                        !- Return Air Fraction
    ,                        !- Fraction Radiant
    ,                        !- Fraction Visible
    1,                       !- Fraction Replaceable
    ,                        !- End-Use Subcategory

No; !- Return Air Fraction Calculated from
!- Plenum Temperature

Or you can have two objects for each zone -- one each for desk task lights and overhead fluorescent troffers:

Lights,
    Desk Task Light,         !- Name
    Zone1,                   !- Zone or ZoneList Name
    DeskLights,              !- Schedule Name
    LightingLevel,           !- Design Level Calculation Method
    ,                        !- Lighting Level {W}
    ,                        !- Watts per Zone Floor Area {W/m2}
    45,                      !- Watts per Person {W/person}
    ,                        !- Return Air Fraction
    ,                        !- Fraction Radiant
    ,                        !- Fraction Visible
    1,                       !- Fraction Replaceable
    TableLights,             !- End-Use Subcategory
    No;                      !- Return Air Fraction Calculated from
                             !-     Plenum Temperature

Lights,
    FluorescentTroffer,      !- Name
    Zone1,                   !- Zone or ZoneList Name
    OfficeLights,            !- Schedule Name
    Watts/Area,              !- Design Level Calculation Method
    ,                        !- Lighting Level {W}
    0.8,                     !- Watts per Zone Floor Area {W/m2}
    ,                        !- Watts per Person {W/person}
    ,                        !- Return Air Fraction
    ,                        !- Fraction Radiant
    ,                        !- Fraction Visible
    1,                       !- Fraction Replaceable
    OfficeLights,            !- End-Use Subcategory
    No;                      !- Return Air Fraction Calculated from
                             !-     Plenum Temperature

On Tue, Oct 28, 2014 at 4:17 PM, Jim Dirkes jim@xxxxxxxxxxxxxxxxxxxxxxxxxxx [EnergyPlus_Support] <EnergyPlus_Support@xxxxxxxxxxxxxxx> wrote:

I am not quite sure what you're trying to do, but E+ doesn't concern itself with lighting fixtures, just watts and usage.
For example, if you have a 4 tube 40 watts / tube fluorescent light fixture, you must use about 4 * 40 * 1.25 watts per fixture so as to include ballast energy. Other fixtures may not have a ballast, etc. E+ doesn't know or care.

On Tue, Oct 28, 2014 at 3:23 PM, 'jeannieboef@xxxxxxxxx' jeannieboef@xxxxxxxxx [EnergyPlus_Support] <EnergyPlus_Support@xxxxxxxxxxxxxxx> wrote:

Not to my knowledge. You could check the Lights object fields available in your .idd file, to see if any reference an external fixture object.

Mit freundlichen Grüßen- Sent from my iPhone (excuse the brevity)

i. A.
Jean Marais
b.i.g. bechtold
Tel. +49 30 6706662-23

On 28.10.2014, at 17:12, "Eric Allen Youngson eric@xxxxxxxxxxxxxxxxxxxxxxxx [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx> wrote:

Does anyone know EnergyPlus can specify a lighting fixture object to be referenced by the Lights object?

Thx

--

    Eric Youngson

    eric@xxxxxxxxxxxxxxxxxxxxxxxx

    503 468 7021

    www.successionecological.com

    322 NW 6^th Ave. Suite 200 | Portland, Oregon | 97214

<image001.png>

--

James V Dirkes II, PE, BEMP, LEED AP
The Building Performance Team
1631 Acacia Drive, Grand Rapids, MI 49504
(M) 616 450 8653
The more one does what is good, the freer one becomes. There is no true freedom except in the service of what is good and just.

__._,_.___

Posted by: Ivan Mezzacapa <ivan_slip@xxxxxxxxxxx>

Primary EnergyPlus support is found at: http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx The primary EnergyPlus web site is found at: http://www.energyplus.gov The group web site is: http://groups.yahoo.com/group/EnergyPlus_Support/ Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files. EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Visit Your Group

New Members 15

• Privacy • Unsubscribe • Terms of Use

__,_._,___