[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] PTHP requires air loop?
Dear users,
I am buildings a E+ model for a high-rise apartment building having 60 individual units. Each unit has an under-floor heating system with a gas boiler and an air-conditioner individually . Therefore, I created 60 thermal zones (each unit); each thermal zone is equipped with zone HVAC low temperature radiant system for heating and PTHP for cooling.
What I wonder is that the hot water loop for heating needs to be 60, which are connected to the each gas boiler in 60 units, respectively? If PTHP are set, is air loop required?
Thank you.
__._,_.___
Posted by: hjang35@xxxxxxxxx
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
![]()
__,_._,___