Re: [EnergyPlus_Support] Re: CentralHeatPumpSystem

["Kris Raj kris_raj@xxxxxxxxxxxxxx [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx>]

Is it possible to use a Cooling tower for source in the CentralHeatPump Chiller? This is giving me an error that plant temperatures are getting too hot

   ** Severe  ** Plant temperatures are getting far too hot, check controls and relative loads and capacities
   **   ~~~   **  Environment=Akron Canton Rgnl AP OH USA TMY3 WMO#=725210, at Simulation time=01/05 10:10 - 10:20

   **  Fatal  ** CheckForRunawayPlantTemps: Simulation terminated because of run away plant temperatures, too hot
 

---

From: "Kris Raj kris_raj@xxxxxxxxxxxxxx [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx>
To: EnergyPlus_Support <energyplus_support@xxxxxxxxxxxxxxx>
Sent: Thursday, November 13, 2014 4:18 PM
Subject: [EnergyPlus_Support] Re: CentralHeatPumpSystem

 

Hello, I am simulating a Central heat Pump system with ground loop. I appear to be getting runaway temperatures in loop Where the ground loop temperature just keeps on increasing if I increase the heating capacity. The heating load is not met but the heating plant energy consumption just keeps increasing. What prevents the CentralHeatPump from transferring all the heat to the ground loop. Could someone hint what I could be doing wrong.

Thanks.

__._,_.___

---

Posted by: Kris Raj <kris_raj@xxxxxxxxxxxxxx>

---

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Visit Your Group

• New Members 7

• Privacy • Unsubscribe • Terms of Use

__,_._,___