Again by changing the coordinates of the vertices. If you had a panel with the z dimension at 4m on the south side and 6m on the north (tilted south), you could just swap the height -- 6m on the south
and 4m on the north. And then the panel would tilt towards the north.
----- Reply message -----
From: "Giovani Davi banidavi@xxxxxxxxxxxx [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx>
To: "EnergyPlus_Support@xxxxxxxxxxxxxxx" <EnergyPlus_Support@xxxxxxxxxxxxxxx>
Subject: [EnergyPlus_Support] PV panels
Date: Wed, Nov 26, 2014 1:17 PM
From: "Giovani Davi banidavi@xxxxxxxxxxxx [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx>
To: "EnergyPlus_Support@xxxxxxxxxxxxxxx" <EnergyPlus_Support@xxxxxxxxxxxxxxx>
Subject: [EnergyPlus_Support] PV panels
Date: Wed, Nov 26, 2014 1:17 PM
Thank you very much Mr. Dru. And how about the PV panels orientation
. How could I modify it(from south to north)?
Best regards,
Giovani
__._,_.___
Posted by: <Dru.Crawley@xxxxxxxxxxx>
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
__,_._,___