I'm not directly involved with it, but we're working on a indoor swimming, bathing and sauna project at the minute. It's just getting started so there's probably not much info at the minute. I'll keep my ears open. Swimming pools are very difficalt subjects for simulation. Loads of air, lights, heat, chlorinated water (and air) and very interesting are the correlations between people, water, temperature and evaporation rates. What's worse, you have a large hall and the air velocities in people zones must be at a minimum to avoid draft, so you have stratified air possibly together with mixed air "zones" within the same hall. I was asked to do some CFD and lighting simulation for some areas during the bid stage, but I'm kind of thankfull not to have to do a whole building sim for it. There's a lot of mechanical electrical to come to grips with. The water in our project is warmer than the air. There have been some posts from others in this forum regarding pools. I would search for those posts for tips. Goodluck, Jean Mit freundlichen Grü�en- Sent from my iPhone (excuse the brevity) i. A. Jean Marais b.i.g. bechtold Tel. +49 30 6706662-23 On 05.12.2014, at 09:41, "'Artem Zhukov' green.azhukov@xxxxxxxxx [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx> wrote:
__._,_.___ Posted by: "jeannieboef@xxxxxxxxx" <jeannieboef@xxxxxxxxx> Primary EnergyPlus support is found at: http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx The primary EnergyPlus web site is found at: http://www.energyplus.gov The group web site is: http://groups.yahoo.com/group/EnergyPlus_Support/ Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files. EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button. __,_._,___ |