You have tried to output a variable but you left the
variable name field blank.
At 08:51 AM 12/24/2014, zbalador@xxxxxxxxx [EnergyPlus_Support]
wrote:
I want to analyse the
photovoltaic performance in front of my building...but at first there a
sever error...I can not understand what is the problem:
Program Version,EnergyPlus-32 7.0.0.036, 2014/12/24 06:57
�¨.�¸,IDD_Version 7.0.0.036
************* IDF Context for following error/warning
message:
************* Note -- lines truncated at 280 characters, if
necessary...
************* Only the comment character (!) on a line is
shown -- nothing following that.
************* 9840 Output:Variable,
************* 9841
*,
!
************* 9842
,
!
** Severe ** IP: IDF line~9842 Error detected in
Object=OUTPUT:VARIABLE
** ~~~ ** Field [Variable Name] is
required but was blank
** Severe ** IP: Blank "required" fields
found in input
** Severe ** IP: Out of "range" values
and/or blank required fields found in input
** Fatal ** IP: Errors occurred on processing
IDF file. Preceding condition(s) cause termination.
...Summary of Errors that led to program termination:
..... Reference severe error count=3
..... Last severe error=IP: Out of "range" values
and/or blank required fields found in input
************* Warning: Node connection errors not
checked - most system input has not been read (see previous
warning).
************* Fatal error -- final processing. Program
exited before simulations began. See previous error messages.
************* EnergyPlus Warmup Error Summary. During
Warmup: 0 Warning; 0 Severe Errors.
************* EnergyPlus Sizing Error Summary. During
Sizing: 0 Warning; 0 Severe Errors.
************* EnergyPlus Terminated--Fatal Error Detected. 0
Warning; 3 Severe Errors; Elapsed Time=00hr 00min 1.12sec