[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] Re: Simulation Problem





You must have a completed run before you can see the options for your run in the .rdd file. 

Comment out this line or delete it and make a run.

Not sure what you mean by "make a new variable" -- you can do that with EMS but perhaps you should have your basic run going first.

At 09:11 AM 12/24/2014, Zahra Balador zbalador@xxxxxxxxx [EnergyPlus_Support] wrote:


I know but firstly I should make a new variable and after a run there should be created some options to choose but there is nothing for choosing!!!


On Wednesday, December 24, 2014 7:36 PM, "Linda Lawrie linda@xxxxxxxxxxxxxx [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx> wrote:


 
You have tried to output a variable but you left the variable name field blank.

At 08:51 AM 12/24/2014, zbalador@xxxxxxxxx [EnergyPlus_Support] wrote:


I want to analyse the photovoltaic performance in front of my building...but at first there a sever error...I can not understand what is the problem:
Program Version,EnergyPlus-32 7.0.0.036, 2014/12/24 06:57 �¨.�¸,IDD_Version 7.0.0.036
   ************* IDF Context for following error/warning message:
   ************* Note -- lines truncated at 280 characters, if necessary...
   ************* Only the comment character (!) on a line is shown -- nothing following that.
   *************   9840 Output:Variable,
   *************   9841     *,                       !
   *************   9842     ,                        !
   ** Severe  ** IP: IDF line~9842 Error detected in Object=OUTPUT:VARIABLE
   **   ~~~   ** Field [Variable Name] is required but was blank
   ** Severe  ** IP: Blank "required" fields found in input
   ** Severe  ** IP: Out of "range" values and/or blank required fields found in input
   **  Fatal  ** IP: Errors occurred on processing IDF file. Preceding condition(s) cause termination.
   ...Summary of Errors that led to program termination:
   ..... Reference severe error count=3
   ..... Last severe error=IP: Out of "range" values and/or blank required fields found in input
   ************* Warning:  Node connection errors not checked - most system input has not been read (see previous warning).
   ************* Fatal error -- final processing.  Program exited before simulations began.  See previous error messages.
   ************* EnergyPlus Warmup Error Summary. During Warmup: 0 Warning; 0 Severe Errors.
   ************* EnergyPlus Sizing Error Summary. During Sizing: 0 Warning; 0 Severe Errors.
   ************* EnergyPlus Terminated--Fatal Error Detected. 0 Warning; 3 Severe Errors; Elapsed Time=00hr 00min  1.12sec






__._,_.___

Posted by: Linda Lawrie <linda@xxxxxxxxxxxxxx>


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___