Did you remove the one with the blank output name?
You still have a blank output
variable name:
Output:Variable,*,,Hourly;
You need to remove this line or comment it with an ! in front.
At 10:20 AM 12/24/2014, Zahra Balador zbalador@xxxxxxxxx
[EnergyPlus_Support] wrote:
I changed the names of
generators...but still previous error :(((
version 7 should be capable of run..
On Wednesday, December 24,
2014 8:30 PM, "Linda Lawrie linda@xxxxxxxxxxxxxx
[EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx>
wrote:
You are running a really old version (7.0). I updated it to V8.1 in
order to run.
You still have a blank output variable name:
Output:Variable,*,,Hourly;
and, then, errors:
** Severe ** Generator:Photovoltaic Name, duplicate
name=SIMPLE PV SOUTH VERTICAL
Once you correct that (I'd suggest unique names associated with the
surfaces, such as:
Simple PV South Vertical - pv1
And put them in the Electric Load Generator list, your file should run
and produce the .rdd file that will let you select variable
names.
At 09:27 AM 12/24/2014, Zahra Balador zbalador@xxxxxxxxx
[EnergyPlus_Support] wrote:
this is my file which is
attached :(
On Wednesday,
December 24, 2014 7:54 PM, "Zahra Balador zbalador@xxxxxxxxx
[EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx>
wrote:
I know but in the first run there is such an error so the options have
not been created :(
On Wednesday, December 24,
2014 7:51 PM, "Linda Lawrie linda@xxxxxxxxxxxxxx
[EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx>
wrote:
You must have a completed run before you can see the options for your run
in the .rdd file.
Comment out this line or delete it and make a run.
Not sure what you mean by "make a new variable" -- you can do
that with EMS but perhaps you should have your basic run going
first.
At 09:11 AM 12/24/2014, Zahra Balador zbalador@xxxxxxxxx
[EnergyPlus_Support] wrote:
I know but firstly I should make
a new variable and after a run there should be created some options to
choose but there is nothing for choosing!!!
On Wednesday,
December 24, 2014 7:36 PM, "Linda Lawrie linda@xxxxxxxxxxxxxx
[EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx>
wrote:
You have tried to output a variable but you left the variable name field
blank.
At 08:51 AM 12/24/2014, zbalador@xxxxxxxxx [EnergyPlus_Support]
wrote:
I want to analyse the
photovoltaic performance in front of my building...but at first there a
sever error...I can not understand what is the problem:
Program Version,EnergyPlus-32 7.0.0.036, 2014/12/24 06:57
Ã?Æ?Ã?â???Ã?Æ??Ã??Ã???Ã?¨.Ã?Æ?Ã?â???Ã?Æ?âÃ?Æ?â??Ã??Ã?¸,IDD_Version 7.0.0.036
************* IDF Context for following error/warning
message:
************* Note -- lines truncated at 280 characters, if
necessary...
************* Only the comment character (!) on a line is
shown -- nothing following that.
************* 9840 Output:Variable,
************* 9841
*,
!
************* 9842
,
!
** Severe ** IP: IDF line~9842 Error detected in
Object=OUTPUT:VARIABLE
** ~~~ ** Field [Variable Name] is
required but was blank
** Severe ** IP: Blank "required" fields
found in input
** Severe ** IP: Out of "range" values
and/or blank required fields found in input
** Fatal ** IP: Errors occurred on processing
IDF file. Preceding condition(s) cause termination.
...Summary of Errors that led to program termination:
..... Reference severe error count=3
..... Last severe error=IP: Out of "range" values
and/or blank required fields found in input
************* Warning: Node connection errors not
checked - most system input has not been read (see previous
warning).
************* Fatal error -- final processing. Program
exited before simulations began. See previous error messages.
************* EnergyPlus Warmup Error Summary. During
Warmup: 0 Warning; 0 Severe Errors.
************* EnergyPlus Sizing Error Summary. During
Sizing: 0 Warning; 0 Severe Errors.
************* EnergyPlus Terminated--Fatal Error Detected. 0
Warning; 3 Severe Errors; Elapsed Time=00hr 00min 1.12sec