Re: [EnergyPlus_Support] Re: Simulation Problem

["Linda Lawrie linda@xxxxxxxxxxxxxx [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx>]

You can certainly ask questions -- not sure I can guarantee
answers but many on this forum can and will help.

At 10:47 AM 12/24/2014, Zahra Balador zbalador@xxxxxxxxx
[EnergyPlus_Support] wrote:


> I dont know how to thank
> youuuuuu....
> I was disapointed ...I had forgotten to save it after delete the blank
> one :)
> thank you again
> can i ask the other questions too?
>
>
> On Wednesday, December 24,
> 2014 8:56 PM, "Linda Lawrie linda@xxxxxxxxxxxxxx
> [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx>
> wrote:
>
>
>   
> Did you remove the one with the blank output name?
>
> > You still have a blank output
> > variable name:
> >   Output:Variable,*,,Hourly;
>
>
> You need to remove this line or comment it with an ! in front.
>
> At 10:20 AM 12/24/2014, Zahra Balador zbalador@xxxxxxxxx
> [EnergyPlus_Support] wrote:
>
>
> > I changed the names of
> > generators...but still previous error :(((
> > version 7 should be capable of run..
> On Wednesday,
> December 24, 2014 8:30 PM, "Linda Lawrie linda@xxxxxxxxxxxxxx
> [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx>
> wrote:
>
>
>   
> You are running a really old version (7.0).  I updated it to V8.1 in
> order to run.
>
> You still have a blank output variable name:
>   Output:Variable,*,,Hourly;
>
>
> and, then, errors:
>    ** Severe  ** Generator:Photovoltaic Name, duplicate
> name=SIMPLE PV SOUTH VERTICAL
>
> Once you correct that (I'd suggest unique names associated with the
> surfaces, such as:
> Simple PV South Vertical - pv1
>
> And put them in the Electric Load Generator list, your file should run
> and produce the .rdd file that will let you select variable
> names.
>
> At 09:27 AM 12/24/2014, Zahra Balador zbalador@xxxxxxxxx
> [EnergyPlus_Support] wrote:
>
>
> > this is my file which is
> > attached :(
> On Wednesday,
> December 24, 2014 7:54 PM, "Zahra Balador zbalador@xxxxxxxxx
> [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx>
> wrote:
>
>
>   
> I know but in the first run there is such an error so the options have
> not been created :(
>
>
> On Wednesday, December 24,
> 2014 7:51 PM, "Linda Lawrie linda@xxxxxxxxxxxxxx
> [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx>
> wrote:
>
>
>   
> You must have a completed run before you can see the options for your run
> in the .rdd file.  
>
> Comment out this line or delete it and make a run.
>
> Not sure what you mean by "make a new variable" -- you can do
> that with EMS but perhaps you should have your basic run going
> first.
>
> At 09:11 AM 12/24/2014, Zahra Balador zbalador@xxxxxxxxx
> [EnergyPlus_Support] wrote:
>
>
> > I know but firstly I should make
> > a new variable and after a run there should be created some options to
> > choose but there is nothing for
> > choosing!!!
> On
> Wednesday, December 24, 2014 7:36 PM, "Linda Lawrie
> linda@xxxxxxxxxxxxxx [EnergyPlus_Support]"
> <EnergyPlus_Support@xxxxxxxxxxxxxxx> wrote:
>
>
>   
> You have tried to output a variable but you left the variable name field
> blank.
>
> At 08:51 AM 12/24/2014, zbalador@xxxxxxxxx [EnergyPlus_Support]
> wrote:
>
>
> > I want to analyse the
> > photovoltaic performance in front of my building...but at first there a
> > sever error...I can not understand what is the problem:
> > Program Version,EnergyPlus-32 7.0.0.036, 2014/12/24 06:57
> > Ã?Æ?Ã?â???Ã?Æ??Ã??Ã???Ã?¨.Ã?Æ?Ã?â???Ã?Æ?âÃ?Æ?â??Ã??Ã?¸,IDD_Version
> > 7.0.0.036
> >    ************* IDF Context for following error/warning
> > message:
> >    ************* Note -- lines truncated at 280 characters, if
> > necessary...
> >    ************* Only the comment character (!) on a line is
> > shown -- nothing following that.
> >    *************   9840 Output:Variable,
> >    *************   9841    
> > *,                      
> > !
> >    *************   9842    
> > ,                       
> > !
> >    ** Severe  ** IP: IDF line~9842 Error detected in
> > Object=OUTPUT:VARIABLE
> >    **   ~~~   ** Field [Variable Name] is
> > required but was blank
> >    ** Severe  ** IP: Blank "required" fields
> > found in input
> >    ** Severe  ** IP: Out of "range" values
> > and/or blank required fields found in input
> >    **  Fatal  ** IP: Errors occurred on processing
> > IDF file. Preceding condition(s) cause termination.
> >    ...Summary of Errors that led to program termination:
> >    ..... Reference severe error count=3
> >    ..... Last severe error=IP: Out of "range" values
> > and/or blank required fields found in input
> >    ************* Warning:  Node connection errors not
> > checked - most system input has not been read (see previous
> > warning).
> >    ************* Fatal error -- final processing.  Program
> > exited before simulations began.  See previous error messages.
> >    ************* EnergyPlus Warmup Error Summary. During
> > Warmup: 0 Warning; 0 Severe Errors.
> >    ************* EnergyPlus Sizing Error Summary. During
> > Sizing: 0 Warning; 0 Severe Errors.
> >    ************* EnergyPlus Terminated--Fatal Error Detected. 0
> > Warning; 3 Severe Errors; Elapsed Time=00hr 00min  1.12sec

__._,_.___

---

Posted by: Linda Lawrie <linda@xxxxxxxxxxxxxx>

---

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Visit Your Group

• New Members 8

• Privacy • Unsubscribe • Terms of Use

__,_._,___