Volume flowrate weighted outlet temp. Consider the motor efficiencies in the same way. Building "equivalent" models can seldom be perfect, but is often "good enough".
Mit freundlichen Grü�en- Sent from my iPhone (excuse the brevity)
i. A.
Jean Marais
b.i.g. bechtold
Tel. +49 30 6706662-23
On 25.12.2014, at 08:09, "sangjin722@xxxxxxxxx [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx> wrote:
Hello, all.
There are 80+ FCU installed in a building and the cooling load, supply air temperature & air flow rate of each fcu are different.Then is it possible to combine the zones which have the same load and schedule into one?
As I know, the cooling load and air flow rate can be added up after merging the zone.
But how to set the supply air temperature?
Thanks.
Jin
__._,_.___
Posted by: "jeannieboef@xxxxxxxxx" <jeannieboef@xxxxxxxxx>
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
__,_._,___