[EnergyPlus_Support] daylight control and ems light control

["Fakeha Sehar fakeha_s@xxxxxxxxx [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx>]

In EnergyPlus individual light sources cannot be modeled. So when daylight control is activated using lets say continuous dimming, the lumped lighting input power for a zone is reduced linearly in response to daylight illuminance?Right? If lighting input power is reduced by 75.5% this may not be practically possible since lumped light input power is being controlled not individual light sources being dimmed?

By some user defined fraction lights input power for a zone is reduced using EMS the same concept is applied? 

__._,_.___

---

Posted by: Fakeha Sehar <fakeha_s@xxxxxxxxx>

---

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Visit Your Group

• New Members 13

• Privacy • Unsubscribe • Terms of Use

__,_._,___