You can also use stepped control. Is that what you mean?
Mit freundlichen Grü�en- Sent from my iPhone (excuse the brevity)
i. A.
Jean Marais
b.i.g. bechtold
Tel. +49 30 6706662-23
On 15.01.2015, at 18:58, "Fakeha Sehar fakeha_s@xxxxxxxxx [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx> wrote:
In EnergyPlus individual light sources cannot be modeled. So when daylight control is activated using lets say continuous dimming, the lumped lighting input power for a zone is reduced linearly in response to daylight illuminance?Right? If lighting input power is reduced by 75.5% this may not be practically possible since lumped light input power is being controlled not individual light sources being dimmed?By some user defined fraction lights input power for a zone is reduced using EMS the same concept is applied?
__._,_.___
Posted by: "jeannieboef@xxxxxxxxx" <jeannieboef@xxxxxxxxx>
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
__,_._,___