[EnergyPlus_Support] Re: How to pass/send optimal design values from pareto optimization to EnergyPlus?

["m.waseemahmad@xxxxxxxxxxx [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx>]

Hello Dr Li,

Thanks for your answer but I am not asking for tools. We have algorithms ready, its just the way to use our own control values e.g. sending supply temperature set-points or mass flow rates. For example EnergyPlus can control LowtemperatureRadiant systems based on different temperatures e.g. indoor air temperature, MRT, outdoor air temperature etc, We also have to define a throttling range, meaning if the set-point is 15 degrees and throttling range is 2 degrees C then there will be no water flow where the temperature is at or above 16 degree and maximum flow at 14 degrees and so on. My question is can we implement our own control algorithm so that we specify flow rate at a given time step meaning the control algorithm (written in java) will pass/send values of Water flow rate to EnergyPlus rather than E+ controlling based on throttling range?

Thanks

Kindest Regards

Waseem

 

__._,_.___

---

Posted by: m.waseemahmad@xxxxxxxxxxx

---

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Visit Your Group

• New Members 14

• Privacy • Unsubscribe • Terms of Use

__,_._,___