In the E+ example file
VariableRefrigerantFlow_5Zone.idf,
OUTSIDE AIR INLET NODE 1:System Node Standard Density
Volume Flow Rate [m3/s](TimeStep) = 0.102293
ZoneHVAC:TerminalUnit:VariableRefrigerantFlow,
TU1, !- Zone Terminal Unit Name
OutdoorAir:Mixer, !- Outside Air Mixer Object
Type
TU1 OA Mixer, !- Outside Air Mixer Object
Name
OutdoorAir:Mixer,
TU1 OA Mixer, !- Name
TU1 VRF DX CCoil Inlet Node, !- Mixed Air Node Name
Outside Air Inlet Node 1,!- Outdoor Air Stream Node
Name <<<<<<
Relief Air Outlet Node 1,!- Relief Air Stream Node
Name
TU1 Inlet Node; !- Return Air Stream Node
Name
Hi everyone,
I have a problem a long time and I can not
solve.
All VRF systems have the output with external
air flow zero. I do not know what the problem
is.
I used the example file
VariableRefrigerantFlow_5Zone.idf, and even then
the outside air is zero.
Does anyone know the source of the problem?
Thanks!
Técg. Ivan
Mezzacapa
Projetista
de Ar
Condicionado / Consultor em Eficiência
Energética
Celular:
(11)9963-9326
--
Richard Raustad
Florida Solar Energy Center
1679 Clearlake Road
Cocoa, FL 32922
Ph: (321)638-1454
http://www.fsec.ucf.edu/en/
Program Director
Electric Vehicle Transportation Center
http://evtc.fsec.ucf.edu/