[EnergyPlus_Support] high heat gain for core bottom zones from internal plug loads

["Fakeha Sehar fakeha_s@xxxxxxxxx [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx>]

I am using E+ version 8.1. From the html report I observe that the plug load density for the core bottom zone is being considered as the sum of its surrounding perimeter zones plug load densities. This is further confirmed by observing the internal convective heat gain rate,  heat added to air by internal loads, which is too high for the bottom core zone than similar mid/top floor's core zones.

I have also checked the surface convection rate for the core zones, for the bottom floor this is low as compared to mid/top floors core zones. So the surfaces for the bottom floor core zone are not the reason for its high heat gain .

Please let me know how this error can be removed.

__._,_.___

---

Posted by: Fakeha Sehar <fakeha_s@xxxxxxxxx>

---

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Visit Your Group

• New Members 9

• Privacy • Unsubscribe • Terms of Use

__,_._,___