[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [EnergyPlus_Support] New Feature Request - "Return Air Fraction" and "Exhaust Air Fraction" for Internal Loads?
I believe you can enter a new feature request directly into
the github system for EnergyPlus.
At 09:36 AM 4/24/2015, Karen Walkerman kwalkerman@xxxxxxxxx
[EnergyPlus_Support] wrote:
I'm currently modeling a few
buildings where the design team wants to explore the effectiveness of
heat recovery on kitchen exhaust hoods.
In the DOE Commercial Reference Buildings, kitchen cooking equipment -
70% of the energy is modeled as "lost." Â Some of this energy
is truly "lost" to the food being cooked, but much of it is
captured and exhausted by hoods. It is not mixed with the zone,
but in the model, it is captured by a system and should be modeled as
such.
When modeling lights and refrigeration equipment, we are given the option
to specify a "return air fraction" - a portion of the heat that
is transferred directly to the zone return air. It would be
awesome if this option were added to the following objects:
ElectricEquipment
GasEquipment
SteamEquipment
HotWaterEquipment
OtherEquipment
It would also be great to have an "Exhaust Air Fraction" option
- so that some of the heat generated could be assigned directly to the
exhaust air node.
While the need to model kitchen exhaust heat recovery illuminates the
limitation within EnergyPlus, it is a limitation in accurately modeling
kitchen energy use even without heat recovery.
Thanks!
Karen
__._,_.___
Posted by: Linda Lawrie <linda@xxxxxxxxxxxxxx>
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
__,_._,___